-
This particular connector is a 7-way RV blade socket and is designed to mount on the vehicle-side of the connection, to accept a trailer wiring plug. It features a USCAR base to connect to a standard USCAR plug (see application info to verify fitment with your vehicle). Once plugged into the USCAR socket, it provides a connection for the taillights, turn signals, brake lights, backup or reverse lights, electric trailer brakes and a 12-volt battery. It also provides a connection for the ground wire. This trailer wiring connector is built to withstand the elements. It is constructed from durable black molded plastic to be impervious to rust, and it features a dust cap with a spring mechanism to keep out rain, salt, grime and dirt when the connector is not in use., HEAVY-DUTY REPLACEMENT OE 7-WAY RV BLADE SOCKET (PLUGS INTO USCAR) #55416 Weather-resistant dust cover features a rubber insert to seal out moisture. Spring-loaded cover also helps keep connector clean when not in use. Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector. Simple plug-and-play design eliminates the need for cutting or splicing. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power.
This particular connector is a 7-way RV blade socket and is designed to mount on the vehicle-side of the connection, to accept a trailer wiring plug. It features a twist-in USCAR base to connect to a twist-in USCAR plug (see application info to verify fitment with your vehicle). Once plugged into the USCAR socket, it provides a connection for the taillights, turn signals, brake lights, backup or reverse lights, electric trailer brakes and a 12-volt battery. It also provides a connection for the ground wire. This trailer wiring connector is built to withstand the elements. It is constructed from durable black molded plastic to be impervious to rust, and it features a dust cap with a spring mechanism to keep out rain, salt, grime and dirt when the connector is not in use., REPLACEMENT OE 7-WAY RV BLADE SOCKET (TWISTS INTO USCAR) #56415 Plugs into USCAR socket to provide 7-way RV blade trailer wiring connector. Twist-in, plug-and-play design eliminates the need for cutting or splicing. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power. Spring-loaded dust cover keeps connector clean when not in use.
Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT's custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle's electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM USCAR connector and offers a 4-way flat and 6-way round connector (see application info to verify fitment with your vehicle). It also comes with a mounting bracket for easy installation. CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use., DUAL-OUTPUT 6 & 4-WAY CONNECTOR (PLUGS INTO USCAR) #55664 Plugs into USCAR socket to provide 4-way and 6-way trailer wiring connectors. Fits USCAR-equipped vehicles with factory tow plugs only. Simple plug-and-play design eliminates the need for cutting or splicing. 4-way flat output connects tail lights, brake lights and turn signals. 6-way round socket adds connection for electric brakes and auxiliary power. Dust covers included to keep connectors clean when not in use. Slit loom keeps wires contained and well protected. Metal bracket securely mounts wiring to the vehicle or trailer hitch. Backed by a limited one-year warranty.
Most vehicles do not come ready to tow. Unless your vehicle has a towing package, it is probably not equipped with a trailer wiring connector. This is where CURT's custom wiring connectors come into play. A custom wiring connector uses a single original equipment plug to plug into a special socket provided by your vehicle. Though this option is not available on every vehicle, some automotive manufacturers design their vehicles to be easily equipped for towing by supplying a socket, integrated into the vehicle's electrical system, to readily accept a custom wiring connector. With a CURT custom wiring connector, there is no need to tap into the taillight assembly because a special socket is already provided. This special custom wiring connector actually provides two connector sockets for a multipurpose option. It plugs into an OEM connector and offers a 4-way flat and 7-way RV blade connector. It comes with a mounting bracket for easy installation and is designed to be a custom wiring option for a variety of vehicles (see application guide to verify fitment with your vehicle). CURT custom wiring connectors are designed to be long-lasting and simple to install. They come with dust covers to keep your connector clean when not in use., DUAL-OUTPUT 7 & 4-WAY CONNECTOR (PLUGS INTO USCAR) #55774 Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors. Fits USCAR-equipped vehicles with factory tow plugs only. Simple plug-and-play design eliminates the need for cutting or splicing. 4-way flat output connects tail lights, brake lights and turn signals. 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power. Dust covers included to keep connectors clean when not in use. Slit loom keeps wires contained and well protected. Metal bracket securely mounts wiring to the vehicle or trailer hitch. Backed by a limited one-year warranty.
Husky Liners form fit Mud Guards are made from durable, impact resistant all-weather thermoplastic that's as tough as nails (or rocks for that matter). They're easy to install, conform perfectly to your fenders, and protect your ride and those around you from the rage of the road., Fits models without fender flares. Does not fit models with Z71 Package or Power Deploying running boards.
Tail Light Assembly, Clear Lens, Chrome Housing, Pair, . Guaranteed To Improve Your Vehicles Appearance. Rigorously Tested For Fit And Function. Simple Plug And Play. No Modifications Required. Easy Installation Using Common Hand Tools. Uses Stock Mounting Locations And Hardware. D.O.T. Compliant To S.A.E. Standards. Sold As A Pair. Does Not Fit Barn Door Models., Tail Light Assembly; Clear Lens; Chrome Housing; Pair;
ProRyde Progressive, Adjustable, Lift & Leveling Kits allow a multitude of front ride height options. While our competition provides a fixed Non-Adjustable solution, our Progressive Kits are simply indexed to your liking, at the time of installation, allowing front Lifts up to 3.0 in. NOTE: WHILE SUPPLIES LAST, GM LD/HD 3-in-1 Block Kit w/U-bolts-No Taper Incl. Tapered U Bolts; Rear Lift Height 1-2 in. Multi-Adjustable Kit; Adjust Prior To Install;
Convenient and easy; this strap rack allows you to carry up to 2 bikes and then folds down for easy storage, Passage Trunk Mount Rack, 2 Bike, 
ProRyde Progressive, Adjustable, Lift & Leveling Kits allow a multitude of front ride height options. While our competition provides a fixed Non-Adjustable solution, our Progressive Kits are simply indexed to your liking, at the time of installation, allowing front Lifts up to 3.0 in. NOTE: WHILE SUPPLIES LAST, GM/Hummer HD torsion Key Front Lift Kit (8-Lug) Adjustable Up To 2 in. Of Lift; Install Time 1.8 Hours;
Enhances the look of your vehicle for a true custom look! Installs easily using Stainless Steel Hardware. Made of 304 Stainless Steel and covered by Putco's NeveRust Lifetime Warranty. Includes UV-Resistant Rubber Edge Trim for a customized fit. No other product on the market like it. PRICED RIGHT! GM Official Licensed Product., Fender Trim; GM Official Licensed Product; Stainless Steel;
With their recessed stainless steel bolts and massive presence, Pocket Style Fender Flares are a Bushwacker original and an off-road icon. They give you the hard-core look of bolt-on flares, with no body-side sheet metal drilling required. Pocket Style Fender Flares are custom-designed for your vehicle to complement oversized tires and high-clearance lift kits. You can mount them right out of the box with their tough, OEM-style matte black finish they're UV protected so they won't chalk. You can also paint them to match or accent the body color for a factory-custom look. Pocket Style Fender Flares are made in the USA from our thick, warp-resistant Dura-Flex 2000 material and tailor-made for added durability and flexibility on the trail. When you need maximum tire coverage with minimum time and effort, it's in the pocket. Pocket Style Fender Flares from Bushwacker. Limited Lifetime Warranty., Pocket Style Fender Flares; 2 pc.; Rear Tire Coverage 2 in.; Rear Height 5.25 in.; Smooth Finish; Black; w/o Body Hardware;
When you want the look that blends sophistication with design and performance, be ORIGINAL with the OE Style Flare! The low profile, refined contours are precision engineered to match the vehicles styling. Choose the flare that enhances the factory accents while providing premium tire protection. Limited Lifetime Warranty., OE Style Fender Flares; 4 pc.; Front Tire Coverage .75 in.; Front Height 4 in.; Rear Tire Coverage .75 in; Rear Height 4.5 in.; Black; w/o Body Hardware;
When you want the look that blends sophistication with design and performance, be ORIGINAL with the OE Style Flare! The low profile, refined contours are precision engineered to match the vehicles styling. Choose the flare that enhances the factory accents while providing premium tire protection. Limited Lifetime Warranty., OE Style Fender Flares; 4 pc.; Front Tire Coverage .5 in.; Front Height 7.5 in.; Rear Tire Coverage .5 in; Rear Height 7.5 in.; Smooth Finish; Black;
With their recessed stainless steel bolts and massive presence, Pocket Style Fender Flares are a Bushwacker original and an off-road icon. They give you the hard-core look of bolt-on flares, with no body-side sheet metal drilling required. Pocket Style Fender Flares are custom-designed for your vehicle to complement oversized tires and high-clearance lift kits. You can mount them right out of the box with their tough, OEM-style matte black finish they're UV protected so they won't chalk. You can also paint them to match or accent the body color for a factory-custom look. Pocket Style Fender Flares are made in the USA from our thick, warp-resistant Dura-Flex 2000 material and tailor-made for added durability and flexibility on the trail. When you need maximum tire coverage with minimum time and effort, it's in the pocket. Pocket Style Fender Flares from Bushwacker. Limited Lifetime Warranty., Pocket Style Fender Flares; 4 pc.; Front Tire Coverage 2 in.; Front Height 4.25 in.; Rear Tire Coverage 2 in; Rear Height 4.25 in.; Black; w/o Body Hardware;
X-Metal Grilles are designed for the extreme truck and SUV enthusiast looking to make a bold statement. X-Metal Series Grilles feature an aggressively studded perimeter surrounding the formed heavy gauge mesh. Each stud is embedded with X-Metal branding and every grille includes our patented X-Metal logo. This X-Metal Grille is made of mild steel and comes with chrome studs and black powdercoat finish, most X-Metal Grilles are also available with black finish and black studs (Stealth X-Metal Series). Our uncompromising quality begins with advanced 3D CAD supported engineering and design. All our products undergo rigorous testing for fit, finish, drivability and durability. Each part starts with a custom jig using laser cut materials, precision TIG welding and meticulous assembly and quality control. This dedication of American craftsmanship shows in every product that leaves our facility in California. All our black powder coated grilles go through a multi-stage process, first they are sandblasted to prepare the surface for our epoxy primer base coat. Second, they are cleaned to remove contaminants from the sandblast process. Then an epoxy primer base coat is applied and cured to seal the entire surface, finally the color top coat is applied over the primer and cured to provide long lasting protection and a high-quality OEM finish., X-METAL Series - Studded Main Grille - ALL Black - Custom 1 Pc Grille - Includes Billet End Caps (Requires cutting center cross bar) Fits models without body cladding only
Quick Links
Get Social
© 2025 Accessory Warehouse | All Rights Reserved
