-
The DECKED Tool Box is constructed using injection molded, high-impact resin with galvanized steel and aluminum reinforcement. Robust steel armored locking mechanism combined with driver side lock makes forced entry nearly impossible. Comes with (2) keys. It's molded not welded, so you get a seamless lid and tub as well as overbuilt, moisture repelling, watertight architecture. Seals tightly when closed with an EPDM gasket. Anti-corrosion treated steel and aluminum hardware make for long-lasting durability. This clever, 6000 series aluminum step ladder easily deploys so you can actually reach your tools and gear. The ladder takes up minimal space, efficiently folding closed inside the box. Features: Effortless lid opening and closing. No slamming of fingers. (2) tie-downs at base of tub for securing a moto/ATV or large cargo. Seamless, watertight construction. EPDM lid gasket. Steel armored locking mechanism combined with driver side lock. Comes with (2) keys. Blue D-Box included with Tool Box. Hangers inside tub to hold in place. Tray for small tools & gear. Included with Tool Box. Tray for small tools & gear. Included with Tool Box. Ladder Not Included (PN# TBFSLADDER), The DECKED Tool Box is NOT compatible with all DECKED Drawer Systems. The Drawer System is only compatible with the Tool Box for select 8' trucks, the drawers are not compatible with the Tool Box for any short 5'6" or standard 6'6" bed length trucks. COMPATIBILITY WITH A GOOSENECK OR FIFTH WHEEL: It is critical that any Gooseneck or Fifth Wheel has enough clearance to accommodate the DECKED Tool Box. The Tool Box is 6" in height above the bedrails and takes up 24" in bed depth between the cabside bed wall and the edge of the Tool Box. NOTE: If your trailer swings wide while turning, make sure there is extra clearance as needed to avoid hitting the Tool Box on a tight turn. DUAL REAR WHEEL TRUCKS: If you have a dually fender, the Tool Box is compatible, but the access ladder may or may not be compatible. If the measurement from the cab to the start of the dually fender is 24" or less, the ladder won't have room to deploy properly. ALL TOOL BOXES COME STANDARD WITH THE FOLLOWING: Set of (2) keys for drivers side lock, (1) Blue DECKED D-Box, and (1) Snack Tray included at no extra charge. The Tool Box with the integrated Access Ladder fits one nested D-Box and one Snack Tray. Without the Access Ladder, it will fit 2 of each. Fits up to 3 Crossboxes at the bottom of the tub. Additional accessories ship for free, so order up! NOTE: The DECKED Tool Box will most likely be compatible if your bed width is between 61.375" and 70.5" inside bedrail to inside bedrail (this should be the measurement from the left inside bed rail to the right inside bed rail). If you are unsure if the DECKED Tool Box will fit in your truck, call us before placing an order so we can confirm.
58" T-Tracks are designed for use with Yakima and Thule rack systems. T-Tracks are currently only offered for Full-Size DECKED Systems., If you are looking to permanently mount tracks that provide a strong, low profile attachment point for Yakima or Thule rack systems, we have you covered. Core Tracks are made from 6063 T5 aluminum alloy. They can be oriented towards the cabside or tailgate side of your truck bed. These T-tracks have been custom manufactured to align with the steel tubes in your DECKED deck part. Each set of T-tracks come with two tracks and stainless steel mounting screws.
48" T-Tracks are designed for use with Yakima and Thule rack systems. T-Tracks are currently only offered for Full-Size DECKED Systems., If you are looking to permanently mount tracks that provide a strong, low profile attachment point for Yakima or Thule rack systems, we have you covered. Core Tracks are made from 6063 T5 aluminum alloy. They can be oriented towards the cabside or tailgate side of your truck bed. These T-tracks have been custom manufactured to align with the steel tubes in your DECKED deck part. Each set of T-tracks come with two tracks and stainless steel mounting screws.
Maximize your truck bed storage capacity with these handy Stash Bins. Available in either deep or shallow styles, they drop into the pass-through access at the deck corners and sit securely beneath lockable lids. Perfect for small "need it now" items - everything from hex wrenches to tape measures to beer. Everyone likes beer., Features: 100% Made in the USA. Prop 65 compliant material. Pack of 2. Fitment: Fits ALL DECKED Drawer Systems (Does not fit legacy systems). Specs: Shallow Stash Bins: 8.5" x 6.4" 2.5" 1.5 L 0.04 lb 
Maximize your truck bed storage capacity with these handy Stash Bins. Available in either deep or shallow styles, they drop into the pass-through access at the deck corners and sit securely beneath lockable lids. Perfect for small "need it now" items - everything from hex wrenches to tape measures to beer. Everyone likes beer., Features: 100% Made in the USA. Prop 65 compliant material. Pack of 2. Fitment: Fits ALL DECKED Drawer Systems (Does not fit legacy systems). Specs: Deep Stash Bins: 8.5" x 6.4" 9.5" 5.8 L 1 lb
Own a DECKED Tool Box without a Ladder and want another Snack Tray? (We don't blame you, who doesn't love snacks?!) Add one to your existing Tool Box without a Ladder to store all those knick-knacky things, like screwdrivers, pliers, measuring tapes, gloves, you name it! The Snack Tray fits snugly into grooves on each side of the Tool Box so you have convenient access to all your small tools and gear. NOTE: All Tool Boxes come with one Snack Tray on the driver's side. Ordering a second Snack Tray will only fit a DECKED Tool Box without a ladder. The Snack Tray is NOT compatible with any Drawer Systems, the D-Box, Crossbox, or any other accessories., The Snack Tray fits the DECKED Tool Box Only. Securing into grooves on each side of the Tool Box, the Snack Tray provides convenient access to all your loose bits and small tools. All DECKED Tool Boxes come standard with (1) Snack Tray. A second Snack Tray will only fit a Tool Box without a ladder.
Piecekeepers include two foam-backed, molded resin dividers for transporting shotguns and rifles securely in your DECKED Drawer System. They offer secure, padded cradles that grip the stock and barrel for convenient, easy-to-remove-and-replace access to firearms. Peacekeepers have slotted cutouts to accommodate three long guns per wide drawer or two long guns per midsize narrow drawer. Piecekeepers secure into place inside the drawers. Utilizing the same multi-position drawer slots and locking clips as Drawer Dividers, they can be easily adjusted as needed. Additional clips are included. WIDE PIECEKEEPERS: fit BOTH drawers on full-size truck and cargo van Drawers Systems, AND the WIDE drawer on midsize trucks. Accommodates 3 long guns. DOES NOT FIT THE DECKED TOOL BOX. Piecekeepers only fit the Drawer System. IT IS ENTIRELY POSSIBLE THAT YOUR FIREARM WILL NOT FIT TO ALLOW THE DRAWER TO CLOSE. IN MANY CASES, IT IS IMPOSSIBLE TO KNOW THE FIT UNTIL PHYSICALLY TESTING IT. Piecekeepers are designed for traditional rifles and shotguns. We cannot guarantee your particular flavor of firearm will fit. Due to the variety of shapes, sizes, and dimensions, many modern guns with optics, pistol grips, removable magazines, and other accessories may stack too high to allow the drawer to close. We have provided our best attempt at dimensions., WIDE PIECEKEEPERS: 7.79 tall x 18 5/8 wide, Center slot depth: 4.25, Side slots measured diagonally: 5.25 , Clearance above Piecekeeper is less than 1", Accommodates 3 long guns. Comes in a set of two. Piecekeepers securely transport firearms in your DECKED Drawer System. Designed for traditional rifles and shotguns. The WIDE Piecekeepers are compatible with ALL full-size truck and cargo van drawers. They are also compatible with the WIDE drawer for midsize trucks. Due to the variety of shapes and dimensions, we cannot guarantee your particular flavor of firearm will fit. Many modern long rifles with optics, pistol grips, and removable magazines may stack too high to allow the drawer to close.
Set of 4 Load Locks for use with our Core Trax 1000 tie-down tracks., These load locks for use with our Core Trax 1000 tie-downs. Stainless Steel attachment loops with a pullout rating of 500 lbs.
The DECKED Drawerganizer fits all fill-size drawers and midsize wide drawers. Does not fit midsize narrow drawers., The DRAWERGANIZER is the molded version of ultra-comfy boxer briefs. An accessory which gently cradles al the loos bits rolling around chaotically inside your DECKED drawers. It nests into the handle end of your drawers creating a handy, useful storage space for small tools, hardware, bugspray, duct tape... without them, you're basically going commando. Features: High Impact Polypropylene, Easy Grab Handle, Prop 65 Compliant Material, Battles Clutter and Disorganization, and Easily Accessible. 696 Cubic Inches. 2.6 lbs. Dimensions: 17.625" x 10.125" x 8"
The Drawer Systems top deck is great for what its designed to do - holding tons of gear! But the deck (made of ultra-durable HDPE) can get a little slippery. The lightly padded, slip-resistant DECKED Traction Mat solves this problem. Perfect for holding things like coolers, cases, kennels, and pets in place - all while making it easier on your knees, elbows, and back should you be crawling around in your truck bed. Fits ALL DECKED Drawer Systems (Does not fit legacy systems)., Features: Adhesive backing - lay it down like a giant sticker. Cut to match the Drawer System surface with chamfered edges. Simple installation; start at the tailgate end of the bed, peel, align, and stick it down. Does not interfere with Drawer System removal or reinstallation. Won't leave residue or fragments upon removal.
Secure your most expensive cargo with these D-Ring Tie Downs. The ultimate solution for rough roads, loose loads, and whatever you are trying to grapple. Strap it in, lock it down, and stomp the gas pedal without a care in the world. 400lb rating per D-Ring Tie Down., Features: Anti-corrosion steel. 100% Made in the USA. 2 per pack. Fits ALL current DECKED Drawer Systems (Does not fit legacy systems). New Drawer Systems come standard with 4x D-Ring Tie Downs.
DECKED fits a wide range of service body applications varying in bed width from 48"-50" wide ONLY. Takes our standard length 75.25" long system. Depending on length of your service body bed you will have available space cabside for storing other items. NOTE: If you have an 8' or longer service body bed, this DECKED system will fit; however, the system is NOT 8' long. It takes a standard bed DECKED system that is 75.25" long. You will have remaining open space at the cabside end of your bed. A cross-over tool box or fuel transfer tank is commonly placed in this space. NOTE: All DECKED systems are 12" tallthe same height as a normal service body tailgate. Make sure to secure loads on top of the deck with tie-down straps, implement other modifications or get a taller tailgate., Drawers are full bed-length drawers, but do not fully extend. Max drawer extension: 42" for reasons related to physics. Not compatable with any in-bed towing packages including 5-wheel and gooseneck packages. Works with spray-in bed liner, but not a drop-in plastic liner. Works with BedRug mat, but not with a BedRug Full Liner. 2000 lb payload even distributed weight capacity. 200 lb payload per drawer weight capacity. Total Weight: ~230 lbs. Length: 75.25" Width: 47" Height: 12"
Get organized, end the junk show. Average tool boxes are impossible to access. And to organize? Forget about it! Two full-bed length drawers provide segmented, easy to access storage. 200 lb capacity per drawer. Less time wasted searching for tools and gear directly translates to increased productivity and more money in your pocket. No more crawling around in the back of your truck or van to navigate the heap of gear. DECKED is weatherproof. Anything falling from the sky can't get in. Period. DECKED protects your tools and gear from a harmless little sprinkle to a torrential Act of God. They're not Tupperwear-tight; airborne pariculate like dust or mist may penetrate the drawers. Your truck ain't a man purse. It hauls heavy-stuff like cement, plywood and your ATV/Moto. DECKED is made so you can still stack your truck with 2000lbs. of big stuff. The deck sits right above your wheel whells maximizing your bed's surface area, while still providing easy access to smooth rolling storage drawers underneath. As a truck owner, you've got expensive tools, gear, firearms, and other items that need to be secure when left at the jobsite, campsite or parking lot. The DECKED Drawer System keeps it locked up, out of sight and out of mind. Lock your drawers and lock your tailgate for extra security.,
Set of two drawer locks with two matching keys. Make sure to select the correct locks based off your Full-Size Drawer System. Lock up your tools, hardware, and other valuable gear with our drawer lock and key system for added security. Lock cams have been thickened to resist bending which can disengage lock cam from striker. Steel brace stiffens cam to prevent disengagement from striker reinforcement. Two identical keys per order., NOTE: We have different Drawer Locks depending on the Drawer System you have. If you are purchasing Drawer Locks today with a DECKED System, simply select: PURCHASED NOW W/ DRAWERS. If you already purchased a drawer system, the easiest way to tell which locks you need is to take a look at the underside of your ammo can lids.
Keep expensive tools, rods, and gear locked in your Drawers or Stash Bins, out of harm's way. Designed to fit Drawer Systems and Stash Bins., Features: Comes in packs of two, three, and six. Fitmetn: Fits all DECKED Drawer Systems (Does not fit legacy systems). Does NOT fit DECKED Tool Box. 2 pack is two Drawer locks. 3 pack works for both Drawers and Stash Bins. 6 Pack contains two Drawer locks and 4 Stash Bin locks. Sepcs: Unique, custom key for each pack of locks 
Keep expensive tools, rods, and gear locked in your Drawers or Stash Bins, out of harm's way. Designed to fit Drawer Systems and Stash Bins., Features: Comes in packs of two, three, and six. Fitmetn: Fits all DECKED Drawer Systems (Does not fit legacy systems). Does NOT fit DECKED Tool Box. 2 pack is two Drawer locks. 3 pack works for both Drawers and Stash Bins. 6 Pack contains two Drawer locks and 4 Stash Bin locks. Sepcs: Unique, custom key for each pack of locks
Combo set of Drawer Dividers. Two narrow that fit narrow drawer on midsize truck systems only. Two wide that fit wide drawer. , The dividers are 8" tall and fit into mounting positions within the DECKED drawers, allowing you to customize the drawers for your gear. Each divider has cut-outs that allow you to secure your gear with handy tie-down points. Light gray in color to make finding your stuff easier. Can be taken out or re-positioned with ease. Made from polypropylene. Midsize Narrow Dividers: 8" Tall x 12" & Wide Wide Drawer Dividers: 8" Tall x 18 5/8" Wide (Fits full-size system)
Set of 2 Drawer Dividers. Fits narrow drawer on midsize truck systems only., The dividers are 8" tall and fit into mounting positions within the DECKED drawers, allowing you to customize the drawers for your gear. Each divider has cut-outs that allow you to secure your gear with handy tie-down points. Light gray in color to make finding your stuff easier. Can be taken out or re-positioned with ease. Made from polypropylene. 8" Tall x 12" Wide
Set of four Drawer Dividers. Fits both drawers on full-size truck and cargo van systems and wide drawer only on midsize trucks. Does not fit narrow drawer on midsize trucks., The dividers are 8" tall and fit into mounting positions within the DECKED drawers, allowing you to customize the drawers for your gear. Each divider has cut-outs that allow you to secure your gear with handy tie-down points. 8" Tall x 18 5/8" Wide
Tailored to fit DECKED Full-size Drawers, these dividers fit into mounting positions within DECKED Full-size Drawers, providing custom compartmentalization for your gear. Effortlessly reposition or remove them for ultimate convenience., Features: 100% Made in the USA. Prop 65 compliant material. Dividers are 8" tall. Fitment: Fits all Full-size DECKED Drawer Systems (Does not fit legacy systems). Does NOT fit Midsize Drawer Systems. Does NOT fit DECKED Tool Box. Specs: 19.7" x 0.5" x 8". 0.6 lbs
Set of two Drawer Dividers. Fits both drawers on full-size truck and cargo van systems and wide drawer ONLY on midsize trucks. Does not fit narrow drawer on midsize trucks., The dividers are 8" tall and fit into mounting positions within the DECKED drawers, allowing you to customize the drawers for your gear. Each divider has cut-outs that allow you to secure your gear with handy tie-down points. Light gray in color to make finding your stuff easier. Can be taken out or re-positioned with ease. Made from polypropylene. 8" Tall x 18 5/8" Wide
DECKED Drawer Drain Plugs, set of two with gaskets. Recommended for Full-Size short and midsize DECKED Drawer Systems only. , Drain plugs take DECKED drawers from dry storage to wet storage. They allow you to create your DECKED drawers into a cooler or easily power-wash and clean your drawers. Drain it out! DECKED drain plugs are compatible with full-size SHORT (64.5" in length) systems and midsize systems. They don't work that well with Standard (75.25" in length) systems, unless you're Kareem Abdul-Jabbar, as you likely won't be able to reach them. The drain plugs are meant to be placed in the cabside/driver end of DECKED drawers. You can place the drain plug in the tailgate end of the drawer, but it's not recommend as it may cause it to drag on your tailgate when the drawer is loaded.
Meet the Double Drawerganizer, the new XL addition to our Drawerganizer accessory line. This bad boy can carry a heavy load. With a sturdy handle and some serious volume, the "Double D" can carry a watermelon, cantaloupe, and honeydew, along with all your other groceries, power tools, trinkets, and loose gear. It secures into place at the handle end of your drawers and comes with an easy, grab-and-go handle for quick removal and easy carry., The Double Drawerganizer fits all full-size truck and cargo van Drawer Systems and midsize truck WIDE drawers. Does NOT fit midsize truck narrow drawer. Comes with a sturdy handle and some serious volume to help you get maximum storage and organization out of your DECKED Drawer System. Fits ALL full-size drawers and the WIDE drawer on midsize systems. Does NOT fit the midsize narrow drawer. Does NOT fit DECKED Tool Box. Easy grab handle making it easy to remove as needed. Battles clutter and disorganization. Easily accessible. The feet on the underside engage with drawer geometry to keep it in place (no sliding within the drawer). 17.89"W x 16.05"L x 7.88"H. Can carry 68 LBS .
Quick Links
Get Social
© 2024 Accessory Warehouse | All Rights Reserved
