-
To connect two wires using a snap lock, simply insert the existing wire and tap wire into the snap lock and squeeze the special snap lock blade with a pair of pliers. Then, fold the latching mechanism over. Just like that a connection is made with no need to worry about hot soldering irons, wire strippers or sharp wires poking out. With the snap lock's safety lock latch, you can be confident that wires will stay properly connected through all kinds of weather. CURT snap locks, also known as scotch locks or quick-splice connectors, come in a variety of sizes and feature a high-impact plastic housing with an aluminum blade. The snap locks in this package of 100 are designed to fit 18-14 gauge wire., SNAP LOCK DOUBLE-RUN TAP CONNECTORS (18-14 WIRE GAUGE, 100-PACK) #59906 Instantly splices two wires together using only a pliers. Aluminum blade pierces both channels to eliminate any stripping or soldering. Latching safety lock ensures a reliable connection. Double-run wire channel accepts 18-14 gauge wires. Side gap allows for easy insertion of existing wire. Constructed from high-impact plastic to protect against corrosion. Limited lifetime warranty (one-year finish, one-year parts).
To connect two wires using a snap lock, simply insert the existing wire and tap wire into the snap lock and squeeze the special snap lock blade with a pair of pliers. Then, fold the latching mechanism over. Just like that a connection is made with no need to worry about hot soldering irons, wire strippers or sharp wires poking out. With the snap lock's safety lock latch, you can be confident that wires will stay properly connected through all kinds of weather. CURT snap locks, also known as scotch locks or quick-splice connectors, come in a variety of sizes and feature a high-impact plastic housing with an aluminum blade. The snap locks in this package of 100 are designed to fit 12-10 gauge wire., SNAP LOCK TAP CONNECTORS (12-10 WIRE GAUGE, 100-PACK) #59905 Instantly splices two wires together using only a pliers. Aluminum blade pierces both channels to eliminate any stripping or soldering. Latching safety lock ensures a reliable connection. Accepts virtually any 12-10 gauge wire. Side gap allows for easy insertion of existing wire. Constructed from high-impact plastic to protect against corrosion. Limited lifetime warranty (one-year finish, one-year parts).
To connect two wires using a snap lock, simply insert the existing wire and tap wire into the snap lock and squeeze the special snap lock blade with a pair of pliers. Then, fold the latching mechanism over. Just like that a connection is made with no need to worry about hot soldering irons, wire strippers or sharp wires poking out. With the snap lock's safety lock latch, you can be confident that wires will stay properly connected through all kinds of weather. CURT snap locks, also known as scotch locks or quick-splice connectors, come in a variety of sizes and feature a high-impact plastic housing with an aluminum blade. The snap locks in this package of 100 are designed to fit 18-14 gauge wire., SNAP LOCK TAP CONNECTORS (18-14 WIRE GAUGE, 100-PACK) #58280 Instantly splices two wires together using only a pliers. Aluminum blade pierces both channels to eliminate any stripping or soldering. Latching safety lock ensures a reliable connection. Accepts virtually any 18-14 gauge wire. Side gap allows for easy insertion of existing wire. Constructed from high-impact plastic to protect against corrosion. Limited lifetime warranty (one-year finish, one-year parts).
To connect two wires using a snap lock, simply insert the existing wire and tap wire into the snap lock and squeeze the special snap lock blade with a pair of pliers. Then, fold the latching mechanism over. Just like that a connection is made with no need to worry about hot soldering irons, wire strippers or sharp wires poking out. With the snap lock's safety lock latch, you can be confident that wires will stay properly connected through all kinds of weather. CURT snap locks, also known as scotch locks or quick-splice connectors, come in a variety of sizes and feature a high-impact plastic housing with an aluminum blade. The snap locks in this package of 100 are designed to fit 18-14 gauge wire. They come with a special sealant gel that surrounds the wires and offers the best possible protection against moisture and corrosion., SNAP LOCK TAP CONNECTORS WITH GEL SEALANT (18-14 WIRE GAUGE, 100-PACK) #59956 Instantly splices two wires together using only a pliers. Aluminum blade pierces both channels to eliminate any stripping or soldering. Latching safety lock ensures a reliable connection. Accepts virtually any 18-14 gauge wire. Gel sealant protects connection from moisture and grime. Constructed from high-impact plastic to protect against corrosion. Limited lifetime warranty (one-year finish, one-year parts)
The CURT Soft-Trac 1 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit does not include a battery charger. To keep the battery well-protected from the elements and tampering, this Soft-Trac 1 breakaway kit also comes with a lockable top-load battery case. The case is made from durable plastic to be rust-free and features a screw-tight lid with rubber gaskets to maintain good wiring connections. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 1 BREAKAWAY KIT #52041 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Included lockable battery case deters theft and corrosion. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes lockable battery case, 12V 5-amp rechargeable battery, nylon breakaway switch and mounting hardware.
The CURT Soft-Trac 1 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit also includes a 12-volt battery charger. To keep the battery well-protected from the elements and tampering, this Soft-Trac 1 breakaway kit also comes with a lockable top-load battery case. The case is made from durable plastic to be rust-free and features a screw-tight lid with rubber gaskets to maintain good wiring connections. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 1 BREAKAWAY KIT WITH CHARGER #52040 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using the included charger. Included lockable battery case deters theft and corrosion. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes lockable battery case, 12V 5-amp rechargeable battery, nylon breakaway switch, battery charger and mounting hardware.
The CURT Soft-Trac 2 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit does not include a battery charger. To keep the battery well-protected from the elements and to allow for convenient mounting on your trailer, this Soft-Trac 2 breakaway kit also comes with a top-load battery case. The case is made from durable plastic to be rust-free and features a metal mounting bracket with a 3-1/8" hole, to mount on the trailer tongue or on a jack post. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 2 BREAKAWAY KIT #52026 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Included lockable battery case deters theft and corrosion. Easy one-bolt installation requires no cutting or drilling. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes battery case with mounting bracket, 12V 5 amp sealed rechargeable battery, and nylon breakaway switch.
The CURT Soft-Trac 2 breakaway system comes with a 12-volt, 5-amp battery and a nylon breakaway switch for reliable activation. The battery is designed to be rechargeable for long-term use, and the breakaway switch comes with a 48" lanyard to fit most vehicle-trailer combinations. This particular kit also includes a 12-volt battery charger. To keep the battery well-protected from the elements and to allow for convenient mounting on your trailer, this Soft-Trac 2 breakaway kit also comes with a top-load battery case. The case is made from durable plastic to be rust-free and features a metal mounting bracket with a 3-1/8" hole, to mount on the trailer tongue or on a jack post. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., SOFT-TRAC 2 BREAKAWAY KIT WITH CHARGER #52028 Activates electric trailer brakes in the event of a breakaway. Compatible with trailers with up to three axles. 48" cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using the included charger. Included lockable battery case deters theft and corrosion. Easy one-bolt installation requires no cutting or drilling. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes battery case with mounting bracket, 12V 5 amp sealed rechargeable battery, nylon breakaway switch and battery charger.
CURT terminals can be used for all sorts of wiring and rewiring projects on your trailer or tow vehicle. Terminals may be specifically called for during the installation of certain electrical devices, but in general, they can be used for any number of electrical connection applications using the appropriate size screw or bolt. They offer a more secure mount and a better connection than a bare wire alone. One of the most common ways an electrical terminal is used is in making a ground connection for a connector or other electrical component., SPADE TERMINALS (12-10 WIRE GAUGE, #10 STUD SIZE, 100-PACK) #59631 Allows wires to be fastened down with easy attachment and removal. Perfect for installing towing electrical components or similar applications. Vinyl-insulated to ensure a long-lasting connection. Flared opening allows for easy wire insertion. Color-coded yellow connectors fit 12-10 gauge wires.
CURT terminals can be used for all sorts of wiring and rewiring projects on your trailer or tow vehicle. Terminals may be specifically called for during the installation of certain electrical devices, but in general, they can be used for any number of electrical connection applications using the appropriate size screw or bolt. They offer a more secure mount and a better connection than a bare wire alone. One of the most common ways an electrical terminal is used is in making a ground connection for a connector or other electrical component., SPADE TERMINALS (16-14 WIRE GAUGE, #10 STUD SIZE, 100-PACK) #59621 Allows wires to be fastened down with easy attachment and removal. Perfect for installing towing electrical components or similar applications. Vinyl-insulated to ensure a long-lasting connection. Flared opening allows for easy wire insertion. Color-coded blue connectors fit 16-14 gauge wires.
CURT terminals can be used for all sorts of wiring and rewiring projects on your trailer or tow vehicle. Terminals may be specifically called for during the installation of certain electrical devices, but in general, they can be used for any number of electrical connection applications using the appropriate size screw or bolt. They offer a more secure mount and a better connection than a bare wire alone. One of the most common ways an electrical terminal is used is in making a ground connection for a connector or other electrical component., SPADE TERMINALS (22-18 WIRE GAUGE, #10 STUD SIZE, 100-PACK) #59611 Allows wires to be fastened down with easy attachment and removal. Perfect for installing towing electrical components or similar applications. Vinyl-insulated to ensure a long-lasting connection. Flared opening allows for easy wire insertion. Color-coded red connectors fit 22-18 gauge wires.
Quick Links
Get Social
© 2024 Accessory Warehouse | All Rights Reserved
