-
A CURT connector provides a reliable connection for your trailer wiring, using an industry-standard format, such as a 4-way flat, 6-way round or 7-way RV blade. They can be used to install new wiring on a vehicle or trailer or as replacement connectors for existing wiring. This particular connector is designed to be a perfect OEM replacement, providing a 4-way flat socket and 7-way RV blade socket to accept either trailer plug type. It features a USCAR base to connect to a standard USCAR plug (see application info to verify fitment with your vehicle). Once plugged into the USCAR socket, it provides a connection for the taillights, turn signals, brake lights, backup or reverse lights, electric trailer brakes and a 12-volt battery. It also provides a connection for the ground wire. This trailer wiring connector is built to withstand the elements. It is constructed from durable black molded plastic to be impervious to rust, and it features spring-loaded dust caps to keep out rain, salt, grime and dirt when the connectors are not in use., OEM REPLACEMENT DUAL-OUTPUT 7 & 4-WAY CONNECTOR (PLUGS INTO USCAR) #57020 Plugs into USCAR socket to provide 4-way and 7-way trailer wiring connectors. Fits USCAR-equipped vehicles with factory tow plugs only. Simple plug-and-play design eliminates the need for cutting or splicing. Easy, snap-in installation. 4-way flat output connects tail lights, brake lights and turn signals. 7-way RV blade socket adds reverse lights, electric brakes and auxiliary power. Rubber gasket to keep moisture and elements out. Spring-loaded dust covers keep connectors clean when not in use. Pre-greased terminals for a reliable connection. Backed by a limited one-year warranty.
Converts 3-Wire Vehicle System To Standard 2-Wire Trailer Wiring. 4-Way Flat Connects Tail Lights Brake Lights And Turn Signals. Constructed w/Smt Circuitry For Better Performance/Durability. Color-Coded Wires For Easier Installation. Snap Locks Included For Fast Secure Splicing. No Heavy-Duty Flasher Required. Dust Cover Included To Keep Connector Clean When Not In Use. Made In USA., Adapts vehicles with separate turn and stop lights (3-wire) to standard trailer light wiring (2-wire system). Comes with a dust cover to keep your connector clean when not in use. Limited 1-year Warranty. Made in the USA. Compatible with Curt part #55151.
Rain, road grime and salt can deal a vicious blow to your trailer wiring, and it takes electrical components with an extra-thick shell to stand up to the elements. This CURT powered taillight converter is an advanced taillight converter that offers the ultimate in vehicle compatibility and weather resistance, giving you a reliable wiring connection any season of the year. The advantage of this converter is its potted construction. The potted design seals the internal electrical components in a watertight enclosure and is filled with a solid compound to protect against impacts, vibrations and moisture for long-lasting use, even on the exterior of the vehicle. The converter also features our advanced surface mount technology (SMT), using smaller components mounted directly to the surface of the circuit board. This produces lower resistance, reduced heat generation, longer life cycles and higher reliability. This CURT taillight converter comes with pigtail wires that are able to be spliced into the three-wire vehicle wiring system and convert it to a simple two-wire system, using a standard 4-way flat output, to be compatible with most trailer wiring. This CURT powered taillight converter is a heavy-duty electrical converter for a wide variety of vehicle applications, including certain models of Acura, Audi, BMW, Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, Freightliner, Honda, Infiniti, Jaguar, Kia, Land Rover, Lexus, Lincoln, Mazda, Mercedes, Mercury, MINI, Nissan, Pontiac, Porsche, Saab, Saturn, Scion, Sterling, Subaru, Toyota, Volkswagen and Volvo (to verify your vehicle compatibility, see the CURT application guide at curtmfg.com). The converter comes with color-coded wires and an easy-to-read wiring guide, as well as a dust cover to protect the 4-way flat connector. This package also includes four snap locks for faster, more secure splicing. A powered converter wiring kit #55151 is also required for installation., POWERED 3-TO-2-WIRE TAILLIGHT CONVERTER #56496 - Converts 3-wire system to 2-wire trailer light wiring. Potted enclosure significantly increases water and vibration resistance. 4-way flat output connects tail lights, brake lights and turn signals. Constructed with SMT circuitry for better performance and durability. Improved overvolt, electrostatic discharge (ESD) and short-circuit protection. Color-coded wires with wiring guide for easier installation. Snap locks included for fast, secure splicing. Dust cover included to keep connector clean when not in use. Notes: Requires CURT powered converter wiring kit #55151 or similar.
The CURT Push-to-Test breakaway system adds convenience to your towing preparations with its integrated push-to-test battery case. With the push of a button, the special case uses LEDs to show whether or not the battery is properly charged for towing. When the battery low, its built-in charge function allows it to be easily recharged and ready for the next adventure. The battery offers 12 volts and 5 amps and uses a nylon breakaway switch for reliable activation. The battery case features a side-load design and is made from durable plastic to resist the elements. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., PUSH-TO-TEST BREAKAWAY KIT WITH SIDE-LOAD BATTERY #52042 Activates electric trailer brakes in the event of a breakaway. LED lights indicate a good charge, battery charging or low battery. Compatible with trailers with up to three axles. Cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Push-to-test battery case protects battery from the elements. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes push-to-test battery case, 12V 5-amp rechargeable battery, built-in battery charger, breakaway switch and mounting hardware.
The CURT Push-to-Test breakaway system adds convenience to your towing preparations with its integrated push-to-test battery case. With the push of a button, the special case uses LEDs to show whether or not the battery is properly charged for towing. When the battery low, its built-in charge function allows it to be easily recharged and ready for the next adventure. The battery offers 12 volts and 5 amps and uses a nylon breakaway switch for reliable activation. The battery case features a side-load design and is made from durable plastic to resist the elements. Nobody hitches up a trailer expecting a breakaway, but that doesn't mean you should tow unprepared. Be ready for anything with a CURT breakaway kit., PUSH-TO-TEST BREAKAWAY KIT WITH TOP-LOAD BATTERY #52044 Activates electric trailer brakes in the event of a breakaway. LED lights indicate a good charge, battery charging or low battery. Compatible with trailers with up to three axles. Cable lanyard connects tow vehicle to trailer breakaway battery. 12-volt battery can be recharged using breakaway charger #52025. Push-to-test battery case protects battery from the elements. Bolt-on mounting system for secure installation on the trailer. Meets DOT requirements for holding / breakaway situations. Required in most states. Notes: Includes push-to-test battery case, 12V 5-amp rechargeable battery, built-in battery charger, breakaway switch and mounting hardware.
This 7-way RV blade replacement harness is designed to replace an existing 7-way plug on your trailer and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features color-coded wires for easy splicing into your trailer's wiring system. With a 10' cable and protective plastic sleeve, this harness is perfect for RV travel trailers, providing more than enough length to accommodate virtually any vehicle-trailer combination and maintaining a solid electrical connection in spite of the elements. This 7-way RV blade connector is a male-end plug, specifically designed for the trailer side of the connection., REPLACEMENT 7-WAY RV BLADE WITH 10' WIRES (TRAILER SIDE, PACKAGED) #56623 Replaces the trailer-end plug of any 7-way harness. Interchangeable with other 7-way RV blade connectors. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power. 10' cord length for convenient installation. Color-coded wires for easier splicing. Wires protected by heavy-duty, weather-resistant cable.
This 7-way RV blade replacement harness is designed to replace an existing 7-way plug on your trailer and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features color-coded wires for easy splicing into your trailer's wiring system. With a 10' cable and protective plastic sleeve, this harness is perfect for RV travel trailers, providing more than enough length to accommodate virtually any vehicle-trailer combination and maintaining a solid electrical connection in spite of the elements. This 7-way RV blade connector is a male-end plug, specifically designed for the trailer side of the connection., REPLACEMENT 7-WAY RV BLADE WITH 10' WIRES (TRAILER SIDE) #56603 Replaces the trailer-end plug of any 7-way harness. Interchangeable with other 7-way RV blade connectors. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power. 10' cord length for convenient installation. Color-coded wires for easier splicing. Wires protected by heavy-duty, weather-resistant cable.
This 7-way RV blade replacement harness is designed to replace an existing 7-way plug on your trailer and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features color-coded wires for easy splicing into your trailer's wiring system. With a 6' cable and protective plastic sleeve, this harness is perfect for RV travel trailers, providing enough length to accommodate your vehicle-trailer combination and maintaining a solid electrical connection in spite of the elements. This 7-way RV blade connector is a male-end plug, specifically designed for the trailer side of the connection., REPLACEMENT 7-WAY RV BLADE WITH 6' WIRES (TRAILER SIDE, PACKAGED) #56621 Replaces the trailer-end plug of any 7-way harness. Interchangeable with other 7-way RV blade connectors. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power. 6' cord length for convenient installation. Color-coded wires for easier splicing. Wires protected by heavy-duty, weather-resistant cable.
This 7-way RV blade replacement harness is designed to replace an existing 7-way plug on your trailer and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features color-coded wires for easy splicing into your trailer's wiring system. With a 6' cable and protective plastic sleeve, this harness is perfect for RV travel trailers, providing enough length to accommodate your vehicle-trailer combination and maintaining a solid electrical connection in spite of the elements. This 7-way RV blade connector is a male-end plug, specifically designed for the trailer side of the connection., REPLACEMENT 7-WAY RV BLADE WITH 6' WIRES (TRAILER SIDE) #56601 Replaces the trailer-end plug of any 7-way harness. Interchangeable with other 7-way RV blade connectors. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power. 6' cord length for convenient installation. Color-coded wires for easier splicing. Wires protected by heavy-duty, weather-resistant cable.
This 7-way RV blade replacement harness is designed to replace an existing 7-way plug on your trailer and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features color-coded wires for easy splicing into your trailer's wiring system. With an 8' cable and protective plastic sleeve, this harness is perfect for RV travel trailers, providing more than enough length to accommodate your vehicle-trailer combination and maintaining a solid electrical connection in spite of the elements. This 7-way RV blade connector is a male-end plug, specifically designed for the trailer side of the connection., REPLACEMENT 7-WAY RV BLADE WITH 8' WIRES (TRAILER SIDE, PACKAGED) #56622 Replaces the trailer-end plug of any 7-way harness. Interchangeable with other 7-way RV blade connectors. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power. 8' cord length for convenient installation. Color-coded wires for easier splicing. Wires protected by heavy-duty, weather-resistant cable.
This 7-way RV blade replacement harness is designed to replace an existing 7-way plug on your trailer and supply power for tail lights, turn signals, electric trailer brakes, a 12-volt battery, reverse lights and brake lights, as well as a ground connection. It features color-coded wires for easy splicing into your trailer's wiring system. With an 8' cable and protective plastic sleeve, this harness is perfect for RV travel trailers, providing more than enough length to accommodate your vehicle-trailer combination and maintaining a solid electrical connection in spite of the elements. This 7-way RV blade connector is a male-end plug, specifically designed for the trailer side of the connection., REPLACEMENT 7-WAY RV BLADE WITH 8' WIRES (TRAILER SIDE) #56602 Replaces the trailer-end plug of any 7-way harness. Interchangeable with other 7-way RV blade connectors. 7-way connects tail, brake, reverse, turn signals, brakes and auxiliary power. 8' cord length for convenient installation. Color-coded wires for easier splicing. Wires protected by heavy-duty, weather-resistant cable.
Quick Links
Get Social
© 2024 Accessory Warehouse | All Rights Reserved
