-
CURT terminals can be used for all sorts of wiring and rewiring projects on your trailer or tow vehicle. Terminals may be specifically called for during the installation of certain electrical devices, but in general, they can be used for any number of electrical connection applications using the appropriate size screw or bolt. They offer a more secure mount and a better connection than a bare wire alone. One of the most common ways an electrical terminal is used is in making a ground connection for a connector or other electrical component., RING TERMINALS (16-14 WIRE GAUGE, 5/16" STUD SIZE, 100-PACK) #59525 Allows wires to be fastened down for a firm connection. Perfect for installing towing electrical components or similar applications. Vinyl-insulated to ensure a long-lasting connection. Flared opening allows for easy wire insertion. Color-coded blue connectors fit 16-14 gauge wires.
The RockerBall gooseneck ball is engineered to provide a smoother tow with its state-of-the-art construction. Its integrated ShockDrop technology promotes truck longevity by reducing jerking and jarring that arises from rigid roads, and its offset pin dampens vertical chucking and fore-to-aft motion during starts and stops, providing a ride that is more steady and less rough. Its cushioned isolator also reduces rattling and vibration, improving ride comfort for passengers and even animals so that everyone can ride comfortably. In addition to making towing much smoother, RockerBall makes upgrading to a luxury towing experience easy and hassle-free. Replacing the traditional gooseneck ball is simple with its straightforward, drop-in installation process; and with no airbags or bearings to service, it is virtually maintenance-free, offering more time to travel and less time spent on fixing, repairing and replacing vital components. The RockerBall gooseneck ball is compatible with CURT and B&W gooseneck hitches with round or square holes, and has a standard 2-5/16" diameter ball that couples to most gooseneck trailers. It is rated for up to 30,000 lbs. GTW and 7,500 lbs. vertical load limit, and is constructed with forged steel for superior, dependable towing strength. The base is covered in a durable black powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance. For an improved towing experience that leaves uncomfortable rides in the past, the RockerBall tow ball is the ideal, effortless upgrade to smoother gooseneck towing., ROCKERBALL 2-5/16" CUSHION HITCH GOOSENECK BALL #60654 ShockDrop technology reduces jerking and jarring and promotes truck longevity. Cushioned isolator improves ride comfort for animals and passengers. Offset pin dampens vertical chucking and fore-aft motion during starts and stops. Compatible with CURT and B&W gooseneck hitches with round or square holes. Simple, drop-in installation to easily replace traditional gooseneck ball. Virtually maintenance-free with no airbag or bearings to service. Forged steel construction for dependable towing strength. Durable carbide black powder coat finish on base and chrome plating on ball. 2-5/16" diameter ball couples to most gooseneck trailers. Rated for up to 30,000 lbs. GTW and 7,500 lbs. vertical load limit. Tested for safety to meet SAE J2638 specifications. Limited lifetime warranty (one-year finish, one-year parts). Notes: Gooseneck hitch center section sold separately. Patent pending.
The RockerBall trailer ball dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chucking and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy, uncomfortable and taking a toll on your towing system. The RockerBall completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount stress placed on your vehicle, receiver hitch, brakes and suspension system. The RockerBall is also extremely low maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation. The RockerBall tow ball retrofits onto a variety of standard ball mounts, virtually any mount with a 2-1/2-inch wide trailer ball tongue platform and a 1-inch trailer ball hole. The anti-swivel base keeps the hitch ball properly oriented and locked in place when fully torqued. The CURT RockerBall hitch ball is constructed from forged steel for exceptional strength. The base is covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance. Note: This trailer ball comes with retail packaging., ROCKERBALL 2-5/16" CUSHION HITCH TRAILER BALL (1" SHANK, 7,500 LBS., PACKAGED) #40248 Dynamic trailer ball featuring ShockDrop technology. Dampens jerking and jarring from bumps and potholes for smoother towing. Cushioned isolators reduce rattling and vibration for a more comfortable ride. Reduces shock loads to the vehicle during sudden braking or acceleration. Minimizes stress on tow vehicle's suspension and brakes for extended longevity. Retrofits onto most existing ball mounts to improve current towing experience. Virtually maintenance-free with no airbag or bearings to service. Grease zerk fitting provides easy lubrication. Anti-swivel base fits 2-1/2" wide ball mount tongues with 1" diameter hole. Forged steel construction for dependable towing power. Durable carbide black powder coat finish on base and chrome plating on ball. Standard trailer ball diameter fits 2-5/16" couplers. Rated for 7,500 lbs. gross trailer weight. Tested for safety to meet SAE J684 specifications. Limited lifetime warranty (one-year finish, one-year parts). Notes: Ball mount sold separately (not compatible with Rebellion XD ball mount). Patent# 11,192,408. The mounting platform must be at least 3/8" thick and the hole size must not be more than 1/16" larger than in diameter than the threaded shank.
The RockerBall trailer ball dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chucking and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy, uncomfortable and taking a toll on your towing system. The RockerBall completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount stress placed on your vehicle, receiver hitch, brakes and suspension system. The RockerBall is also extremely low maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation.The RockerBall tow ball retrofits onto a variety of standard ball mounts, virtually any mount with a 2-1/2-inch wide trailer ball tongue platform and a 1-inch trailer ball hole. The anti-swivel base keeps the hitch ball properly oriented and locked in place when fully torqued. The CURT RockerBall hitch ball is constructed from forged steel for exceptional strength. The base is covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance., ROCKERBALL 2" CUSHION HITCH TRAILER BALL (1" SHANK, 7,500 LBS.) #40047 Dynamic trailer ball featuring ShockDrop technology. Dampens jerking and jarring from bumps and potholes for smoother towing. Cushioned isolators reduce rattling and vibration for a more comfortable ride. Reduces shock loads to the vehicle during sudden braking or acceleration. Minimizes stress on tow vehicle's suspension and brakes for extended longevity. Retrofits onto most existing ball mounts to improve current towing experience. Virtually maintenance-free with no airbag or bearings to service. Grease zerk fitting provides easy lubrication. Anti-swivel base fits 2-1/2" wide ball mount tongues with 1" diameter hole. Forged steel construction for dependable towing power. Durable carbide black powder coat finish on base and chrome plating on ball. Standard trailer ball diameter fits 2" couplers. Rated for 7,500 lbs. gross trailer weight. Tested for safety to meet SAE J684 specifications. Limited lifetime warranty (one-year finish, one-year parts). Notes: Ball mount sold separately (not compatible with Rebellion XD ball mount). Patent# 11,192,408. The mounting platform must be at least 3/8" thick and the hole size must not be more than 1/16" larger than in diameter than the threaded shank.
The CURT RockerBall cushion hitch provides improved comfort and enhanced control while towing, featuring our unique ShockDrop technology. An integrated cushion isolator allows the hitch ball to turn the standard ball mount into a cushion hitch with anti-rattle capabilities. The RockerBall ball mount kit is a shock-absorbing hitch accessory that dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chucking and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy, uncomfortable and taking a toll on your towing system. The RockerBall completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount stress placed on your vehicle, receiver hitch, brakes and suspension system. The RockerBall is also extremely low maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation. This RockerBall hitch kit comes with a sway tab ball mount to mount a sway control for enhanced safety on the road (sway control #17200 sold separately). The ball mount has a 2" shank, and the RockerBall is pre-torqued in place providing a 2" rise. The CURT RockerBall hitch ball is constructed from forged steel for exceptional strength. The base and ball mount are covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance., Dynamic trailer ball featuring ShockDrop technology. Dampens jerking and jarring from bumps and potholes for smoother towing. Cushioned isolators reduce rattling and vibration for a more comfortable ride. Reduces shock loads to the vehicle during sudden braking or acceleration. Minimizes stress on tow vehicle's suspension and brakes for extended longevity. Sway tab provides an attachment point for a trailer sway control unit. Fits trailer hitches with a 2" x 2" receiver tube opening. Virtually maintenance-free with no airbag or bearings to service. Grease zerk fitting provides easy lubrication. 2" rise for precise trailer leveling. Forged steel ball for dependable towing power. Durable black powder coat finish (chrome plating on ball). Standard trailer ball diameter fits 2-5/16" couplers. Rated for 7,500 lbs. GTW and 750 lbs. TW. Tested for safety to meet SAE J684 specifications. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes 2-5/16" RockerBall #40248 and ball mount #45820. Patent# 11,192,408. Weight capacity may change if trailer ball is removed.
The RockerBall ball mount kit is a shock-absorbing hitch accessory that dynamically reduces jerking and jarring while towing. As your trailer passes over bumps and potholes, it produces all kinds of vibrations, jolting, chucking and noise. With a traditional metal-on-metal connection, these annoyances are directly transferred to your tow vehicle, making your ride noisy, uncomfortable and taking a toll on your towing system. The RockerBall completely changes your towing experience by absorbing the erratic movement and rattling of your trailer at the coupling point. This provides a smoother ride and increased control over the vehicle and trailer. It also reduces the amount stress placed on your vehicle, receiver hitch, brakes and suspension system. The RockerBall is also extremely low maintenance compared to other torsion hitch and cushion hitch options. It has no airbags or bearings to service. Simply apply grease to the integrated zerk fitting as needed for continuous lubrication and smooth operation. This RockerBall hitch kit comes with a standard ball mount with a 5" drop and standard 2" shank to fit most class 3, class 4 and class 5 receiver hitches. It also includes an anti-rattle shim kit for maximum vibration resistance. The CURT RockerBall hitch ball is constructed from forged steel for exceptional strength. The base and ball mount are covered in a durable powder coat finish, and the ball itself has a chrome plating for long-lasting weather resistance., ROCKERBALL CUSHION HITCH WITH 2" BALL (2" SHANK, 7,500 LBS., 5" DROP) #45144 Dynamic trailer ball featuring ShockDrop technology. Dampens jerking and jarring from bumps and potholes for smoother towing. Cushioned isolators reduce rattling and vibration for a more comfortable ride. Reduces shock loads to the vehicle during sudden braking or acceleration. Minimizes stress on tow vehicle's suspension and brakes for extended longevity. Fits trailer hitches with a 2" x 2" receiver tube opening. Virtually maintenance-free with no airbag or bearings to service. Grease zerk fitting provides easy lubrication. 5" drop for leveling towing with large or lifted trucks. Forged steel ball for dependable towing power. Durable black powder coat finish (chrome plating on ball). Standard trailer ball diameter fits 2" couplers. Rated for 7,500 lbs. GTW and 750 lbs. TW. Tested for safety to meet SAE J684 specifications. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes 2" RockerBall #40047, ball mount #45070 and anti-rattle #22321. Patent# 11,192,408. Weight capacity may change if trailer ball is removed.
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., ROUND BAR WEIGHT DISTRIBUTION HARDWARE KIT #17076 Includes replacement hardware for CURT round bar WD hitches.
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., ROUND BAR WEIGHT DISTRIBUTION HEAD ADJUSTMENT KIT #17114 Replaces 1" rivet in round bar weight distribution hitches. Allows for simple adjustment of head angle. Plated in a zinc finish for excellent rust resistance. Notes: Includes one rivet and seven washers.
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., ROUND BAR WEIGHT DISTRIBUTION HITCH (5K - 6K LBS., 31-5/8" BARS) #17000 Levels tow vehicle and trailer by redistributing a portion of the tongue weight. Equipped with round, forged steel spring bars for reliable strength. Heavy-duty, formed head can be adjusted for precise leveling. Features built-in sway control attachment tabs. 2" shank can be flipped to provide necessary drop or rise. 2-1/2" x 2-1/2" WD replacement shank also available. Hookup brackets and lift handle allow for easy leveraging of spring bars. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank, spring bars, head, hookup brackets, pin & clip. Trailer ball not included.
The CURT weight distribution hitch is a specialized towing system that provides improved vehicle and trailer control by leveling the trailer and more evenly distributing its tongue weight across the trailer's and vehicle's axles. Weight distribution hitches are commonly used on travel trailers and campers but can also be applied to other large loads., ROUND BAR WEIGHT DISTRIBUTION HITCH (8K - 10K LBS., 31-5/8" BARS) #17002 Levels tow vehicle and trailer by redistributing a portion of the tongue weight. Equipped with round, forged steel spring bars for reliable strength. Heavy-duty, formed head can be adjusted for precise leveling. Features built-in sway control attachment tabs. 2" shank can be flipped to provide necessary drop or rise. 2-1/2" x 2-1/2" WD replacement shank also available. Hookup brackets and lift handle allow for easy leveraging of spring bars. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank, spring bars, head, hookup brackets, pin & clip. Trailer ball not included.
Your route is planned and the trails are calling, but before you can cover any ground, you need to start with a solid connection between your tow vehicle and trailer. The CURT round bar weight distribution hitch with integrated lubrication offers a smooth ride and level towing with its heavy-duty components and built-in lubrication system. From travel trailers to popup campers, the CURT WD hitch is the perfect camping companion to let you Bring It., ROUND BAR WEIGHT DISTRIBUTION HITCH WITH INTEGRATED LUBRICATION (10-14K) #17057 Levels tow vehicle and trailer by redistributing a portion of the tongue weight. Grease zerk fitting provides easy, continuous lubrication. Grease must be applied to the zerk in order to lubricate. Equipped with round, forged steel spring bars for reliable strength. Heavy-duty, fabricated head can be adjusted for precise leveling. Features built-in sway control attachment tabs. 2" shank can be flipped to provide necessary drop or rise. 2-1/2" x 2-1/2" WD replacement shank also available. Hookup brackets and lift handle allow for easy leveraging of spring bars. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes shank, spring bars, head, hookup brackets, pin & clip. Trailer ball not included.
Quick Links
Get Social
© 2024 Accessory Warehouse | All Rights Reserved
