-
This particular receiver-mount ball and pintle hook is designed to insert into any 2" x 2" receiver tube. With a trailer ball capacity of 10,000 lbs. and a pintle capacity of 16,000 lbs., it offers a solid complement to most class 4 and class 5 trailer hitches (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). The pintle hook fits any lunette ring with a 2-1/2" or 3" inside eye diameter, while the trailer ball can be coupled to any 2" coupler. The heavy-duty towing done with pintle hitches brings with it a certain amount of wear and tear on your towing equipment, and to prepare for this, CURT uses a quality finish on all of our pintle mounts, lunette eyes and combination pintle hitches. This hitch-mounted ball and pintle combo is coated in a black powder coat finish with a chrome plating on the trailer ball, providing the perfect amount of rust and scratch resistance needed to face the heavy-duty towing you do every day., RECEIVER-MOUNT BALL & PINTLE HITCH (2" SHANK, 2" BALL, 10,000 LBS.) #48007 Fits trailer hitches with a 2" x 2" receiver tube opening. Couples to 2" couplers or lunette eyes with a 2-1/2" or 3" inside diameter. Spring-loaded locking arm for secure coupling. Constructed from solid, forged steel for superior strength. Protected by a durable powder coat finish. Changeable trailer ball features a hard chrome finish. Limited lifetime warranty (one-year finish, one-year parts).
Rather than using a reducer sleeve or hitch adapter to increase the shank size of your 2" mount, this pintle hook features a solid steel 2-1/2" x 2-1/2" shank. With a solid shank and a gross trailer weight capacity of 20,000 lbs., it offers a solid complement to commercial-duty class 5 trailer hitches (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). The pintle hook fits any lunette ring with a 2-1/2" inside eye diameter, and it comes with a safety pin for secure coupling. The heavy-duty towing done with pintle hitches brings with it a certain amount of wear and tear on your towing equipment, and to prepare for this, CURT uses a quality finish on all of our pintle mounts, lunette eyes and combination pintle hitches. This hitch-mounted pintle hook is coated in a black powder coat finish to provide the perfect amount of rust and scratch resistance needed to face the heavy-duty towing you do every day., RECEIVER-MOUNT PINTLE HOOK (2-1/2" SHANK, 20,000 LBS., 2-1/2" LUNETTE RINGS) #48010 Fits trailer hitches with a 2-1/2" x 2-1/2" receiver tube opening. Couples to lunette eyes with a 2-1/2" inside diameter. Spring-loaded locking arm for secure coupling. Constructed from solid, forged steel for superior strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts)
This particular receiver-mount pintle hook is designed to insert into any 2" x 2" receiver tube. With a solid shank and a gross trailer weight capacity of 10,000 lbs., it offers a solid complement to most class 4 and class 5 trailer hitches (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). The pintle hook fits any lunette ring with a 2-1/2" inside eye diameter, and it comes with a safety pin for secure coupling. The heavy-duty towing done with pintle hitches brings with it a certain amount of wear and tear on your towing equipment, and to prepare for this, CURT uses a quality finish on all of our pintle mounts, lunette eyes and combination pintle hitches. This hitch-mounted pintle hook is coated in a black powder coat finish to provide the perfect amount of rust and scratch resistance needed to face the heavy-duty towing you do every day., RECEIVER-MOUNT PINTLE HOOK (2" SHANK, 10,000 LBS., 2-1/2" LUNETTE RINGS) #48005 Fits trailer hitches with a 2" x 2" receiver tube opening. Couples to lunette eyes with a 2-1/2" inside diameter. Spring-loaded locking arm for secure coupling. Constructed from solid, forged steel for superior strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts).
This particular receiver-mount pintle hook is designed to insert into any 2" x 2" receiver tube. With a solid shank and a gross trailer weight capacity of 20,000 lbs., it offers a solid complement to most class 5 trailer hitches (NOTE: Never exceed the lowest weight capacity of any towing component; i.e. the vehicle, hitch, trailer, etc). The pintle hook fits any lunette ring with a 2-1/2" inside eye diameter, and it comes with a safety pin for secure coupling. The heavy-duty towing done with pintle hitches brings with it a certain amount of wear and tear on your towing equipment, and to prepare for this, CURT uses a quality finish on all of our pintle mounts, lunette eyes and combination pintle hitches. This hitch-mounted pintle hook is coated in a black powder coat finish to provide the perfect amount of rust and scratch resistance needed to face the heavy-duty towing you do every day., RECEIVER-MOUNT PINTLE HOOK (2" SHANK, 20,000 LBS., 2-1/2" LUNETTE RINGS) #48004 Fits trailer hitches with a 2" x 2" receiver tube opening. Couples to lunette eyes with a 2-1/2" inside diameter. Spring-loaded locking arm for secure coupling. Constructed from solid, forged steel for superior strength. Protected by a durable powder coat finish. Limited lifetime warranty (one-year finish, one-year parts).
This CURT reducer sleeve adapter converts a 2-1/2" x 2-1/2" receiver tube opening to a 2" x 2" opening. It installs easily and is compatible with virtually any 2-1/2" x 2-1/2" hitch. Its gross trailer weight capacity and tongue weight capacity are limited to the hitch. All CURT adapters are constructed using our quality manufacturing processes. We CNC-form each unit, weld it together using advanced robotic systems and then mechanically descale every surface to make each adapter smooth to accept a finishing coat. To finish off this adapter, we give it a durable black carbide powder coat finish to ensure it has excellent rust, chip and UV resistance., REDUCER SLEEVE (2-1/2" TO 2" SHANK) #45405 Reduces a 2-1/2" x 2-1/2" receiver tube opening to fit a 2" x 2" shank. High-strength carbon steel construction. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Weight capacity limited to hitch capacity.
A sway control unit is an inexpensive solution to the problem of a wandering trailer. CURT sway control units are designed to attach to your vehicle and trailer at the coupling point and counteract any lateral movement in your trailer, keeping your tow load straighter on the road and giving you more control over your vehicle. The sway bar uses a material like that used in brake pads to provide the necessary resistance while still allowing your vehicle to complete proper turns with your trailer attached. The sway control mounts onto the frame of your trailer and connects to the vehicle's ball mount using a separate trailer ball from that used for coupling the trailer. This sway control replacement ball is designed to attach a sway control unit to the vehicle-side of the connection. With its 5/8" shank diameter, it mounts into the mounting tab of a weight distribution hitch or a sway control ball mount. It features a ball diameter of 1-1/4" to fit the CURT sway control unit #17200 and features a chrome-plated finish for long-lasting rust resistance., REPLACEMENT 1-1/4" SWAY CONTROL BALL (5/8" X 1-3/4" SHANK, PACKAGED) #40010 Hitch-mounted attachment ball for the sway control unit #17200. 5/8" diameter shank fits most weight distribution hitches. Also compatible with sway tab ball mount #45820 or weld-on sway tab #45822. Sway control helps reduce lateral trailer movement. Constructed from high-strength steel. Protected by a durable chrome-plated finish. Zinc-plated hex nut and helical lock washer for secure mounting. Notes: The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger in diameter than the threaded shank
This sway control replacement ball is designed to attach a sway control unit to the vehicle-side of the connection. With its 5/8" shank diameter, it mounts into the mounting tab of a weight distribution hitch or a sway control ball mount. It features a ball diameter of 1-1/4" to fit the CURT sway control unit #17200 and features a chrome-plated finish for long-lasting rust resistance., REPLACEMENT 1-1/4" SWAY CONTROL BALL (5/8" X 1-3/4" SHANK) #40093 Hitch-mounted attachment ball for the sway control unit #17200. 5/8" diameter shank fits most weight distribution hitches. Also compatible with sway tab ball mount #45820 or weld-on sway tab #45822. Sway control helps reduce lateral trailer movement. Constructed from high-strength steel. Protected by a durable chrome-plated finish. Zinc-plated hex nut and helical lock washer for secure mounting. Notes: The mounting platform must be at least 3/8" thick, and the hole size must not be more than 1/16" larger in diameter than the threaded shank.
This replacement pintle trailer ball fits any CURT ball and pintle combination and offers a ball capacity of 6,000 lbs. With a drop forged steel construction and hard chrome finish it stands up to the wear and tear of pintle towing applications and regular coupler towing alike. It features a ball diameter of 1-7/8" and comes with fine threads and a nylock nut for secure fastening on any CURT ball and pintle combo., REPLACEMENT 1-7/8" PINTLE BALL (6,000 LBS., 1-1/4" SHANK) #48810 Replaces the trailer ball in any CURT ball & pintle combination. Fits 1-7/8" couplers or a lunette eye with a 2-1/2" or 3" inside diameter. 1-1/4" diameter shank for maximum strength. Fine threads and self-securing nylock nut for secure mounting. Constructed from high-strength, drop-forged steel. Protected by a hard chrome-plated finish.
The CURT replacement Posi-Lock latch is easy to install and fits on our straight-tongue Posi-Lock couplers. It is made from hardy steel construction and has a durable zinc finish to protect from corrosion, wear and tear. A unique features of the Posi-Lock latch is its adjustable design. The lockable latch mechanism adjusts by tightening or loosening a bolt within the latch to ensure a firm hold on the trailer ball. This CURT Posi-Lock repair latch is designed to fit a 1-7/8" trailer ball and can be used on 2", 2-1/2" or 3" channel couplers., REPLACEMENT 1-7/8" POSI-LOCK COUPLER LATCH FOR STRAIGHT-TONGUE COUPLERS #25094 Replaces coupler latch in posi-lock couplers for 1-7/8" trailer balls. Fits couplers with 2", 2-1/2" or 3" channel widths. Spring and nut posi-lock mechanism allows for easy adjustment. Features holes to accept a safety pin or coupler lock. Constructed from high-strength steel. Protected by a durable zinc-plated finish.
This CURT Switch Ball trailer ball head features a 1-7/8" ball diameter and a 1-1/8" neck hole diameter. It is constructed from premium-grade steel for optimum strength and has a bright nickel-chrome finish for lasting rust resistance. It is rated to tow up to 8,000 lbs. gross trailer weight and is tested in accordance with SAE J684 for safety., REPLACEMENT 1-7/8" SWITCH BALL TRAILER BALL (FITS 1-1/8" NECK, PACKAGED) #42781 Fits 1-7/8" couplers and accepts up to 8,000 lbs. GTW. Exclusive 'J' groove design for secure attachment to the shank. No tools, coins or pins required for trailer ball installation. Shank bears the weight, freeing the coupler from friction and binding. Constructed from high-strength steel. Protected by a premium grade, nickel chrome-plated finish. Independently tested in accordance with SAE J684 for safety and proven safe. U.S. patent# 5,169,168; Canadian patent# 1,325,445. Notes: Available while supplies last
This CURT Switch Ball trailer ball head features a 1-7/8" ball diameter and a 1-1/8" neck hole diameter. It is constructed from premium-grade steel for optimum strength and has a bright nickel-chrome finish for lasting rust resistance. It is rated to tow up to 8,000 lbs. gross trailer weight and is tested in accordance with SAE J684 for safety., REPLACEMENT 1-7/8" SWITCH BALL TRAILER BALL (FITS 1-1/8" NECK) #42780 Fits 1-7/8" couplers and accepts up to 8,000 lbs. GTW. Exclusive 'J' groove design for secure attachment to the shank. No tools, coins or pins required for trailer ball installation. Shank bears the weight, freeing the coupler from friction and binding. Constructed from high-strength steel. Protected by a premium grade, nickel chrome-plated finish. Independently tested in accordance with SAE J684 for safety and proven safe. U.S. patent# 5,169,168; Canadian patent# 1,325,445.
Quick Links
Get Social
© 2024 Accessory Warehouse | All Rights Reserved
