-
The CURT A16 is designed to provide a surprisingly quiet ride while maintain superior towing power. It has a gross trailer weight capacity of 16,000 lbs. and can handle a vertical load up to 4,000 lbs. It comes with a three-position coupling indicator visible from your pickup truck cab, an extra wide head for easier coupling and high-strength interlocking die-cast jaws for a secure hold on your 5th wheel trailer. This 16K 5th wheel hitch excels in quiet 5th wheel towing. It uses a fully articulating torsion head, a cast yoke with poly-torsion inserts and interlocking jaws to create stability for your trailer and tow vehicle. These components also allow the A16 to suppress shock and vibrations and reduce any additional noise coming from your trailer. Like the other CURT A-Series hitches, the A16 is coated with a durable carbide powder coat finish. It is tested in accordance with SAE J2638 for safety and includes a limited lifetime warranty. This A16 5th wheel hitch head comes attached to the CURT S20 slider. CURT 5th wheel sliders are built with a solid design to eliminate chucking in the towing position and promote smooth rolling from forward to rearward positions, with no binding. With the slider installed, you can safely move the coupling point 12" toward the rear, allowing your short-bed truck to make turns without obstruction. The slider is comfortable and easy to operate, featuring a lift-style lever that is easily accessible over the side of the truck wall. The lever moves in a more user-friendly, ergonomic motion compared to traditional, pull-out-style levers. Best of all, the slider automatically latches into place in both directions, meaning you only have to get out of the truck once to complete the operation., A16 SLIDING 5TH WHEEL HITCH, 16,000 LBS. #16052 Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Three-position coupling indicator clearly shows coupling status. S20 5th wheel slider #16564 provides 12" of travel in the truck bed. Automatically latches in both directions so you only have to exit the truck once. Mounts to all industry-standard base rails. Compatible with kingpin extension boxes, including common pivoting pin boxes. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes A16 5th wheel hitch head #16520, S20 slider #16564 and hardware (patent# 8,827,298). Each truck-trailer configuration is different. Be sure to review each configuration and always ensure adequate trailer-to-cab clearance when maneuvering.. Capacity limited to lowest-rated towing component.
The CURT A20 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 20K 5th wheel hitch. Like our A16 hitch, this 20K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. The A20 5th wheel hitch is also engineered for easier installation. The legs are equipped with two pins to properly align with the mounting holes, and they have easy-access mounting bolts for ergonomic tightening. The 5th wheel head also has a fast, one-pin removal system to make installation and removal from the truck bed easier. This 20K 5th wheel mounts to any industry-standard 5th wheel rails, using the 5th wheel legs or a CURT 5th wheel roller. It can also be mounted into the puck system of a truck equipped with the towing prep package, using our OEM-compatible legs or roller adapters. Once installed, the A20 is fast and simple to operate. It features an extra-wide head opening to increase the coupling area for the trailer, and it has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling. To make coupling even easier, it is equipped with a coupling indicator that is visible from the truck cab. The indicator shows the status of the connection and eliminates the need for you to check multiple times while coupling., A20 5TH WHEEL HITCH #16140 Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Alignment pegs and easy-access bolts for simple leg-to-body attachment. Three-position coupling indicator clearly shows coupling status. Compatible with kingpin extension boxes, including common pivoting pin boxes. Mounts to all industry-standard base rails. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). NOTE: Includes 5th wheel head, legs and hardware (patent# 8,827,298) Each truck-trailer configuration is different. Be sure to review each configuration and always ensure adequate trailer-to-cab clearance when maneuvering. Capacity limited to lowest-rated towing component
The CURT A20 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 20K 5th wheel hitch. Like our A16 hitch, this 20K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. To protect the A20 5th wheel hitch against rust, wear and whatever other threats might impede your cross-country tour, it comes with a carbide black powder coat finish and a limited lifetime warranty. Curt also test the A20 for safety in accordance with SAE J2638 to ensure reliability for the road ahead (NOTE: This A20 head unit is designed to be a replacement head only. It requires 5th wheel legs or a 5th wheel roller to be installed. These components are not included in this package.), A20 5TH WHEEL HITCH HEAD #16540 Requires CURT 5th wheel roller or legs for installation. Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Alignment pegs and easy-access bolts for simple leg-to-body attachment. Three-position coupling indicator clearly shows coupling status. Compatible with kingpin extension boxes, including common pivoting pin boxes. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts) Notes: Includes 5th wheel head only. Patent# 8,827,298 Capacity limited to lowest-rated towing component
The CURT A20 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 20K 5th wheel hitch. Like our A16 hitch, this 20K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. The A20 5th wheel hitch is also engineered for easier installation. The legs are equipped with two pins to properly align with the mounting holes, and they have easy-access mounting bolts for ergonomic tightening. The 5th wheel head also has a fast, one-pin removal system to make installation and removal from the truck bed easier. This 20K 5th wheel includes a set of industry-standard 5th wheel rails to mount onto custom 5th wheel brackets (brackets sold separately). Once installed, the A20 is fast and simple to operate. It features an extra-wide head opening to increase the coupling area for the trailer, and it has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling. To make coupling even easier, it is equipped with a coupling indicator that is visible from the truck cab. The indicator shows the status of the connection and eliminates the need for you to check multiple times while coupling., A20 5TH WHEEL HITCH WITH RAILS #16141 Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Alignment pegs and easy-access bolts for simple leg-to-body attachment. Three-position coupling indicator clearly shows coupling status. Compatible with kingpin extension boxes, including common pivoting pin boxes. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Includes A20 5th wheel hitch #16140, base rails #16200 and hardware (patent# 8,827,298). Each truck-trailer configuration is different. Be sure to review each configuration and always ensure adequate trailer-to-cab clearance when maneuvering. Capacity limited to lowest-rated towing component.
The CURT A20 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 20K 5th wheel hitch. Like our A16 hitch, this 20K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. This A20 5th wheel hitch head comes with the CURT R20 roller to be mounted in a short-bed truck using 5th wheel base rails and a bracket kit (base rails and brackets sold separately). CURT 5th wheel rollers feature solid construction and offer a sturdy mounting place for your 5th wheel hitch, ensuring that none of its towing strength is lost. CURT 5th wheel rollers are also true rolling units, meaning they actually roll on wheels that bear the weight of the trailer rather than simply sliding on hollow rods as seen in competitive models. With a thick operating handle, the roller smoothly rolls the 5th wheel head forward and back, locking securely into each position as desired. CURT rollers also provide up to 12" of displacement as well, unlike the more common 10", to give you a wide range of motion and plenty of space to get your 5th wheel trailer around any turn. Once installed, the A20 is fast and simple to operate. It has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling, and it is equipped with a coupling indicator that is visible from the truck cab. To protect the A20 5th wheel hitch against rust and wear, it comes with a black carbide powder coat finish and a limited lifetime warranty. Curt also test the A20 for safety in accordance with SAE J2638 to ensure reliability for the road ahead., A20 SLIDING 5TH WHEEL HITCH, 20,000 LBS. #16541 Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Three-position coupling indicator clearly shows coupling status. R20 5th wheel slider #16550 provides 12" of travel in the truck bed. Rolls on wheels and solid, non-binding rods to be a true rolling unit. Mounts to all industry-standard base rails. Compatible with kingpin extension boxes, including common pivoting pin boxes. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts) Notes: Includes A20 5th wheel hitch head #16540, R20 slider #16550 and hardware (patent# 8,827,298) Each truck-trailer configuration is different. Be sure to review each configuration and always ensure adequate trailer-to-cab clearance when maneuvering. Capacity limited to lowest-rated towing component
The CURT A20 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 20K 5th wheel hitch. Like our A16 hitch, this 20K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. This A20 5th wheel hitch head comes with the CURT R20 roller and a set of 5th wheel rails to be mounted in a short-bed truck using a 5th wheel bracket kit (brackets sold separately). CURT 5th wheel rollers feature solid construction and offer a sturdy mounting place for your 5th wheel hitch, ensuring that none of its towing strength is lost. CURT 5th wheel rollers are also true rolling units, meaning they actually roll on wheels that bear the weight of the trailer rather than simply sliding on hollow rods as seen in competitive models. With a thick operating handle, the roller smoothly rolls the 5th wheel head forward and back, locking securely into each position as desired. CURT rollers also provide up to 12" of displacement as well, unlike the more common 10", to give you a wide range of motion and plenty of space to get your 5th wheel trailer around any turn. Once installed, the A20 is fast and simple to operate. It has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling, and it is equipped with a coupling indicator that is visible from the truck cab. To protect the A20 5th wheel hitch against rust and wear, it comes with a black carbide powder coat finish and a limited lifetime warranty. Curt also test the A20 for safety in accordance with SAE J2638 to ensure reliability for the road ahead., A20 SLIDING 5TH WHEEL HITCH WITH RAILS, 20,000 LBS. #16641 Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Three-position coupling indicator clearly shows coupling status. R20 5th wheel slider #16550 provides 12" of travel in the truck bed. Rolls on wheels and solid, non-binding rods to be a true rolling unit. Compatible with kingpin extension boxes, including common pivoting pin boxes. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Patent# 8,827,298 Notes: Includes A20 5th wheel hitch head #16540, R20 slider #16550, base rails #16200 and hardware. Each truck-trailer configuration is different. Be sure to review each configuration and always ensure adequate trailer-to-cab clearance when maneuvering. Capacity limited to lowest-rated towing component
The CURT A20 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 20K 5th wheel hitch. Like our A16 hitch, this 20K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. This A20 5th wheel hitch head comes with the CURT S20 slider and a set of 5th wheel rails to be mounted in a short-bed truck using a 5th wheel bracket kit (brackets sold separately). CURT 5th wheel sliders are built with a solid design to eliminate chucking in the towing position and promote smooth rolling from forward to rearward positions, with no binding. With the slider installed, you can safely move the coupling point 12" toward the rear, allowing your short-bed truck to make turns without obstruction. The slider is comfortable and easy to operate, featuring a lift-style lever that is easily accessible over the side of the truck wall. The lever moves in a more user-friendly, ergonomic motion compared to traditional, pull-out-style levers. Best of all, the slider automatically latches into place in both directions, meaning you only have to get out of the truck once to complete the operation. Once installed, the A20 is fast and simple to operate. It has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling, and it is equipped with a coupling indicator that is visible from the truck cab. To protect the A20 5th wheel hitch against rust and wear, it comes with a black carbide powder coat finish and a limited lifetime warranty. We also test the A20 for safety in accordance with SAE J2638 to ensure reliability for the road ahead., A20 SLIDING 5TH WHEEL HITCH WITH RAILS, 20,000 LBS. #16631 Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Three-position coupling indicator clearly shows coupling status. S20 5th wheel slider #16564 provides 12" of travel in the truck bed. Automatically latches in both directions so you only have to exit the truck once. Compatible with kingpin extension boxes, including common pivoting pin boxes. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Patent# 8,827,298. Notes: Includes A20 5th wheel hitch head #16540, S20 slider #16564, base rails #16204 and hardware. Each truck-trailer configuration is different. Be sure to review each configuration and always ensure adequate trailer-to-cab clearance when maneuvering. Capacity limited to lowest-rated towing component. 
The CURT A20 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 20K 5th wheel hitch. Like our A16 hitch, this 20K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. This A20 5th wheel hitch head comes with the CURT S20 slider to be mounted in a short-bed truck using 5th wheel base rails and a bracket kit (base rails and brackets sold separately). CURT 5th wheel sliders are built with a solid design to eliminate chucking in the towing position and promote smooth rolling from forward to rearward positions, with no binding. With the slider installed, you can safely move the coupling point 12" toward the rear, allowing your short-bed truck to make turns without obstruction. The slider is comfortable and easy to operate, featuring a lift-style lever that is easily accessible over the side of the truck wall. The lever moves in a more user-friendly, ergonomic motion compared to traditional, pull-out-style levers. Best of all, the slider automatically latches into place in both directions, meaning you only have to get out of the truck once to complete the operation. Once installed, the A20 is fast and simple to operate. It has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling, and it is equipped with a coupling indicator that is visible from the truck cab. To protect the A20 5th wheel hitch against rust and wear, it comes with a black carbide powder coat finish and a limited lifetime warranty. We also test the A20 for safety in accordance with SAE J2638 to ensure reliability for the road ahead., A20 SLIDING 5TH WHEEL HITCH, 20,000 LBS. #16531 Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Three-position coupling indicator clearly shows coupling status. S20 5th wheel slider #16564 provides 12" of travel in the truck bed. Automatically latches in both directions so you only have to exit the truck once. Mounts to all industry-standard base rails. Compatible with kingpin extension boxes, including common pivoting pin boxes. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). Notes: Includes A20 5th wheel hitch head #16540, S20 slider #16564 and hardware (patent# 8,827,298). Each truck-trailer configuration is different. Be sure to review each configuration and always ensure adequate trailer-to-cab clearance when maneuvering.. Capacity limited to lowest-rated towing component.
The CURT A25 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 25K 5th wheel hitch. Like our A16 and A20 hitches, this 25K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. The A25 5th wheel hitch is also engineered for easier installation. The legs are equipped with two pins to properly align with the mounting holes, and they have easy-access mounting bolts for ergonomic tightening. The 5th wheel head also has a fast, one-pin removal system to make installation and removal from the truck bed easier. This 25K 5th wheel mounts to any industry-standard 5th wheel rails, using the 5th wheel legs or a CURT 5th wheel roller. It can also be mounted into the puck system of a truck equipped with the towing prep package, using our OEM puck system legs or roller adapters. Once installed, the A25 is fast and simple to operate. It features an extra-wide head opening to increase the coupling area for the trailer, and it has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling. To make coupling even easier, it is equipped with a coupling indicator that is visible from the truck cab. The indicator shows the status of the connection and eliminates the need for you to check multiple times while coupling., A25 5TH WHEEL HITCH #16180 Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. Constructed with a cast steel main body for a more precise build. High-strength, interlocking cast jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Alignment pegs and easy-access bolts for simple leg-to-body attachment. Three-position coupling indicator clearly shows coupling status. Compatible with kingpin extension boxes, including common pivoting pin boxes. Mounts to all industry-standard base rails. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). NOTE: Includes 5th wheel head, legs and hardware (patent# 8,827,298) Each truck-trailer configuration is different. Be sure to review each configuration and always ensure adequate trailer-to-cab clearance when maneuvering. Capacity limited to lowest-rated towing component
The CURT A25 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 25K 5th wheel hitch. Like our other A-series hitches, this 25K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. The A25 5th wheel hitch is also engineered for easier installation. The 5th wheel head has a fast, one-pin removal system to make installation and removal from the truck bed easier. This 25K 5th wheel can be mounted using 5th wheel legs or a CURT 5th wheel roller (sold separately). It can also be mounted into the puck system of a truck equipped with the towing prep package, using our OEM puck system legs or roller adapters. Once installed, the A25 is fast and simple to operate. It features an extra-wide head opening to increase the coupling area for the trailer, and it has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling. To make coupling even easier, it is equipped with a coupling indicator that is visible from the truck cab. The indicator shows the status of the connection and eliminates the need for you to check multiple times while coupling. To protect the A25 5th wheel hitch against rust, wear and whatever other threats might impede your cross-country tour, it comes with a black carbide powder coat finish and a limited lifetime warranty. Curt also test the A25 for safety in accordance with SAE J2638 to ensure reliability for the road ahead., A25 5TH WHEEL HITCH HEAD #16580 Requires CURT 5th wheel roller or legs for installation. Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. Constructed with a cast steel main body for a more precise build. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Alignment pegs and easy-access bolts for simple leg-to-body attachment. Three-position coupling indicator clearly shows coupling status. Compatible with kingpin extension boxes, including common pivoting pin boxes. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts) Notes: Includes 5th wheel head only. Patent# 8,827,298 Capacity limited to lowest-rated towing component
The CURT A25 5th wheel hitch offers smoother, quieter towing for your home-away-from-home, combining the patented technology of our A-series, an easier mounting system and the power of a 25K 5th wheel hitch. Like our A16 and A20 hitches, this 25K 5th wheel hitch uses a patented cast yoke to allow for unimpeded head movement, while providing exceptional stability for the trailer. The yoke has a set of poly-torsion inserts to suppress shock loads and reduce excessive noise, and the head features high-strength, interlocking jaws to give the trailer stability and the freedom to pivot and swivel as needed. The A25 5th wheel hitch is also engineered for easier installation. The legs are equipped with two pins to properly align with the mounting holes, and they have easy-access mounting bolts for ergonomic tightening. The 5th wheel head also has a fast, one-pin removal system to make installation and removal from the truck bed easier. This 25K 5th wheel includes a set of industry-standard 5th wheel base rails to mount onto custom 5th wheel brackets. Once installed, the A25 is fast and simple to operate. It features an extra-wide head opening to increase the coupling area for the trailer, and it has a lockable, single-throw handle that self-resets to the ready-to-couple position after uncoupling. To make coupling even easier, it is equipped with a coupling indicator that is visible from the truck cab. The indicator shows the status of the connection and eliminates the need for you to check multiple times while coupling. To protect the A25 5th wheel hitch against rust, wear and whatever other threats might impede your cross-country tour, it comes with a carbide black powder coat finish and a limited lifetime warranty. We also test the A25 for safety in accordance with SAE J2638 to ensure reliability for the road ahead., A25 5TH WHEEL HITCH WITH RAILS #16181 Cast yoke with poly-torsion inserts to suppress shock loads and reduce noise. Fully articulating torsion head for controlled coupling and stable towing. Lockable handle self-resets to the ready-to-couple position after uncoupling. Constructed with a cast steel main body for a more precise build. High-strength, interlocking jaws fully wrap the kingpin to minimize noise. Extra wide head opening for easier coupling. Fast, one-pin head removal makes moving easy with smaller, lighter pieces. Alignment pegs and easy-access bolts for simple leg-to-body attachment. Three-position coupling indicator clearly shows coupling status. Compatible with kingpin extension boxes, including common pivoting pin boxes. Offers three height adjustment positions to adapt to each unique truck bed. Includes a polyethylene lube plate to eliminate messy grease deposits. Tested for safety in accordance with SAE J2638. Protected by a highly durable carbide powder coat finish. Limited lifetime warranty (one-year finish, one-year parts). NOTE: Includes A25 5th wheel hitch #16180, base rails #16200 and hardware. Each truck-trailer configuration is different. Be sure to review each configuration and always ensure adequate trailer-to-cab clearance when maneuvering. Capacity limited to lowest-rated towing component.
Quick Links
Get Social
© 2025 Accessory Warehouse | All Rights Reserved
