-
Easy to install, easier to use! ROCKSTAR Full Width Tow Flaps feature a contoured profile for ultimate protection. Five-sixteenths inch rubber combines with rustproof, black urethane coated aluminum to stop debris from damaging your toys. These lightweight mud flaps are easy to store when not in use. Adapt to changing conditions without the need for extra hardware or tools. Simply attach to model specific, anti-sailing mounting brackets with included yellow zinc linch pins, paired perfectly with a fifth-wheel trailer. ROCKSTAR Full Width Tow Flap offers the perfect fit. Recommended mud flap ground clearance is 6 to 8 in. Suggested clearance with a load is 3 in. minimum to prevent mud flaps from dragging. Designed to fit OEM receivers and bumpers, may not fit aftermarket products., Features: MODEL SPECIFIC DESIGN - Shaped to follow the lines of your pickup for extreme protection and to prevent contact with OEM exhaust. Mounting brackets made from stainless steel decrease sailing and bolt directly to existing holes in the frame, no need for drilling. Perforated frame for OEM Dual Exhaust. For dually, Tow Flap Extension is needed for full coverage. 5/16 IN. COMPOSITE RUBBER - Remains pliable to -40° F and helps prevent debris and ice build-up. Adjustable rubber available and allows up to 4 in. higher than OEM ride height. CORROSION RESISTANT FRAME - Manufactured with a black aluminum stabilizing bar to black urethane coated aluminum plate. EASY ON AND OFF - Tow flap secures to mounting brackets with yellow zinc linch pins. Note: Not compatible with deployable bed step.
12" Rear Truck Hardware Support Brackets provide a mounting points inside the rear wheel well for installing our universal mud flaps. These brackets still require screwing into the outer fender lip to secure the rubber mud flap. For a no body drill solution, please see our Gatorback CR Series Mud Flaps., Vehicle specific. For Gatorback, Razorback, and Croc Mud Flaps (non-cut). Galvanized steel/aluminum construction (depending on application). Some drilling may be required. Made in Canada. Note: Unless otherwise specified, fitment is based on stock unmodified vehicle.
Truck Hardware Support Brackets provide a mounting points inside the rear wheel well for installing our universal mud flaps. These brackets still require screwing into the outer fender lip to secure the rubber mud flap. For a no body drill solution, please see our Gatorback CR Series Mud Flaps., Truck Hardware 12" Support Brackets (Rear) features: Vehicle specific, for Gatorback, Razorback, and Croc Mud Flaps (non-cut). Galvanized steel/aluminum construction (depending on application). Some drilling may be required. Made in Canada.
Truck Hardware Support Brackets provide a mounting points inside the rear wheel well for installing our universal mud flaps. These brackets still require screwing into the outer fender lip to secure the rubber mud flap. For a no body drill solution, please see our Gatorback CR Series Mud Flaps. Note: Unless otherwise specified, fitment is based on stock unmodified vehicle., Support Brackets features include: Vehicle specific 04-14 Ford F-150, Rear Fitment, 12" Size, For Gatorback, Razorback, and Croc Mud Flaps (non-cut), Galvanized steel/aluminum construction (depending on application), Some drilling may be required, Made in Canada
Note: Unless otherwise specified, fitment is based on stock unmodified vehicle., DETAILS: Heavy duty rubber. Black anodized aluminum mounting plate with beveled edges. Mounting hardware included. Limited lifetime warranty. Made in Canada. Size: 12".
Truck Hardware Finishing Caps allow you to replace the integrated OEM molded splash guards with a cap that maintains the OEM appearance. The Finishing Caps are also designed to support and enhance the installation of Truck Hardware Gatorback CR Series mudflaps., Truck Hardware Finishing Caps Features Include: Designed for use with our Gatorback/Razorback CR Series Mud Flap Kits. Kit includes front and rear end caps. Made from composite polyurethane. Matte black painted finish. Note: Unless otherwise specified, fitment is based on stock unmodified vehicle.
Truck Hardware Finishing Caps allow you to replace the integrated OEM molded splash guards with a cap that maintains the OEM appearance. The Finishing Caps are also designed to support and enhance the installation of Truck Hardware Gatorback CR Series mudflaps. With the release of the 2019 GMC Sierra 1500, Truck Hardware was presented with a new challenge. The OEM splash guards were designed around the OEM fender flares, which made it impossible to remove the OEM splash guards, without leaving the end of the flares open and unfinished. The OEM splash guards also prevented installing the Gatorback mudflaps properly. The Finishing Caps solve this problem., Designed for use with our Gatorback/Razorback CR Series Mud Flap Kits. Kit includes front and rear end caps. Made from composite polyurethane. Matte black painted finish. Patents: 3073408. Note: Unless otherwise specified, fitment is based on stock unmodified vehicle.
Truck Hardware Finishing Caps allow you to replace the integrated OEM molded splash guards with a cap that maintains the OEM appearance. The Finishing Caps are also designed to support and enhance the installation of Truck Hardware Gatorback CR Series mudflaps. With the release of the 2019 GMC Sierra 1500, Truck Hardware was presented with a new challenge. The OEM splash guards were designed around the OEM fender flares, which made it impossible to remove the OEM splash guards, without leaving the end of the flares open and unfinished. The OEM splash guards also prevented installing the Gatorback mudflaps properly. The Finishing Caps solve this problem., Designed for use with our Gatorback/Razorback CR Series Mud Flap Kits. Kit includes front and rear end caps. Made from composite polyurethane. Matte black painted finish. Patents: 3073408. Note: Unless otherwise specified, fitment is based on stock unmodified vehicle.
Truck Hardware Finishing Caps allow you to replace the integrated OEM molded splash guards with a cap that maintains the OEM appearance. The Finishing Caps are also designed to support and enhance the installation of Truck Hardware Gatorback CR Series mudflaps. With the release of the 2019 GMC Sierra 1500, Truck Hardware was presented with a new challenge. The OEM splash guards were designed around the OEM fender flares, which made it impossible to remove the OEM splash guards, without leaving the end of the flares open and unfinished. The OEM splash guards also prevented installing the Gatorback mudflaps properly. The Finishing Caps solve this problem. Note: Unless otherwise specified, fitment is based on stock unmodified vehicle., Finishing Caps - Front and Rear features include: Designed for use with our Gatorback/Razorback CR Series Mud Flap Kits, Kit includes front and rear end caps, Made from composite polyurethane, Matte black painted finish, Patent pending. Note: Unless otherwise specified, fitment is based on stock unmodified vehicle.
Note: Unless otherwise specified, fitment is based on stock unmodified vehicle., Details: These pre-painted fender plugs allow you to fill the holes found on the front fender of the 2019 Silverado after removing the OEM splash guards. They are available in the same factory paint colours as your truck. Two plugs are required per vehicle. Paint code: WA8555
Note: Unless otherwise specified, fitment is based on stock unmodified vehicle., Details: These pre-painted fender plugs allow you to fill the holes found on the front fender of the 2019 Silverado after removing the OEM splash guards. They are available in the same factory paint colours as your truck. Two plugs are required per vehicle.
Quick Links
Get Social
© 2024 Accessory Warehouse | All Rights Reserved
