-
DECKED fits a wide range of service body applications varying in bed width from 48"-50" wide ONLY. Takes our standard length 75.25" long system. Depending on length of your service body bed you will have available space cabside for storing other items. NOTE: If you have an 8' or longer service body bed, this DECKED system will fit; however, the system is NOT 8' long. It takes a standard bed DECKED system that is 75.25" long. You will have remaining open space at the cabside end of your bed. A cross-over tool box or fuel transfer tank is commonly placed in this space. NOTE: All DECKED systems are 12" tallthe same height as a normal service body tailgate. Make sure to secure loads on top of the deck with tie-down straps, implement other modifications or get a taller tailgate., Drawers are full bed-length drawers, but do not fully extend. Max drawer extension: 42" for reasons related to physics. Not compatable with any in-bed towing packages including 5-wheel and gooseneck packages. Works with spray-in bed liner, but not a drop-in plastic liner. Works with BedRug mat, but not with a BedRug Full Liner. 2000 lb payload even distributed weight capacity. 200 lb payload per drawer weight capacity. Total Weight: ~230 lbs. Length: 75.25" Width: 47" Height: 12"
Secure your most expensive cargo with these D-Ring Tie Downs. The ultimate solution for rough roads, loose loads, and whatever you are trying to grapple. Strap it in, lock it down, and stomp the gas pedal without a care in the world. 400lb rating per D-Ring Tie Down., Features: Anti-corrosion steel. 100% Made in the USA. 2 per pack. Fits ALL current DECKED Drawer Systems (Does not fit legacy systems). New Drawer Systems come standard with 4x D-Ring Tie Downs.
The Drawer Systems top deck is great for what its designed to do - holding tons of gear! But the deck (made of ultra-durable HDPE) can get a little slippery. The lightly padded, slip-resistant DECKED Traction Mat solves this problem. Perfect for holding things like coolers, cases, kennels, and pets in place - all while making it easier on your knees, elbows, and back should you be crawling around in your truck bed. Fits ALL DECKED Drawer Systems (Does not fit legacy systems)., Features: Adhesive backing - lay it down like a giant sticker. Cut to match the Drawer System surface with chamfered edges. Simple installation; start at the tailgate end of the bed, peel, align, and stick it down. Does not interfere with Drawer System removal or reinstallation. Won't leave residue or fragments upon removal.
The DECKED Drawerganizer fits all fill-size drawers and midsize wide drawers. Does not fit midsize narrow drawers., The DRAWERGANIZER is the molded version of ultra-comfy boxer briefs. An accessory which gently cradles al the loos bits rolling around chaotically inside your DECKED drawers. It nests into the handle end of your drawers creating a handy, useful storage space for small tools, hardware, bugspray, duct tape... without them, you're basically going commando. Features: High Impact Polypropylene, Easy Grab Handle, Prop 65 Compliant Material, Battles Clutter and Disorganization, and Easily Accessible. 696 Cubic Inches. 2.6 lbs. Dimensions: 17.625" x 10.125" x 8"
Set of 4 Load Locks for use with our Core Trax 1000 tie-down tracks., These load locks for use with our Core Trax 1000 tie-downs. Stainless Steel attachment loops with a pullout rating of 500 lbs.
Piecekeepers include two foam-backed, molded resin dividers for transporting shotguns and rifles securely in your DECKED Drawer System. They offer secure, padded cradles that grip the stock and barrel for convenient, easy-to-remove-and-replace access to firearms. Peacekeepers have slotted cutouts to accommodate three long guns per wide drawer or two long guns per midsize narrow drawer. Piecekeepers secure into place inside the drawers. Utilizing the same multi-position drawer slots and locking clips as Drawer Dividers, they can be easily adjusted as needed. Additional clips are included. WIDE PIECEKEEPERS: fit BOTH drawers on full-size truck and cargo van Drawers Systems, AND the WIDE drawer on midsize trucks. Accommodates 3 long guns. DOES NOT FIT THE DECKED TOOL BOX. Piecekeepers only fit the Drawer System. IT IS ENTIRELY POSSIBLE THAT YOUR FIREARM WILL NOT FIT TO ALLOW THE DRAWER TO CLOSE. IN MANY CASES, IT IS IMPOSSIBLE TO KNOW THE FIT UNTIL PHYSICALLY TESTING IT. Piecekeepers are designed for traditional rifles and shotguns. We cannot guarantee your particular flavor of firearm will fit. Due to the variety of shapes, sizes, and dimensions, many modern guns with optics, pistol grips, removable magazines, and other accessories may stack too high to allow the drawer to close. We have provided our best attempt at dimensions., WIDE PIECEKEEPERS: 7.79 tall x 18 5/8 wide, Center slot depth: 4.25, Side slots measured diagonally: 5.25 , Clearance above Piecekeeper is less than 1", Accommodates 3 long guns. Comes in a set of two. Piecekeepers securely transport firearms in your DECKED Drawer System. Designed for traditional rifles and shotguns. The WIDE Piecekeepers are compatible with ALL full-size truck and cargo van drawers. They are also compatible with the WIDE drawer for midsize trucks. Due to the variety of shapes and dimensions, we cannot guarantee your particular flavor of firearm will fit. Many modern long rifles with optics, pistol grips, and removable magazines may stack too high to allow the drawer to close.
Maximize your truck bed storage capacity with these handy Stash Bins. Available in either deep or shallow styles, they drop into the pass-through access at the deck corners and sit securely beneath lockable lids. Perfect for small "need it now" items - everything from hex wrenches to tape measures to beer. Everyone likes beer., Features: 100% Made in the USA. Prop 65 compliant material. Pack of 2. Fitment: Fits ALL DECKED Drawer Systems (Does not fit legacy systems). Specs: Deep Stash Bins: 8.5" x 6.4" 9.5" 5.8 L 1 lb 
Maximize your truck bed storage capacity with these handy Stash Bins. Available in either deep or shallow styles, they drop into the pass-through access at the deck corners and sit securely beneath lockable lids. Perfect for small "need it now" items - everything from hex wrenches to tape measures to beer. Everyone likes beer., Features: 100% Made in the USA. Prop 65 compliant material. Pack of 2. Fitment: Fits ALL DECKED Drawer Systems (Does not fit legacy systems). Specs: Shallow Stash Bins: 8.5" x 6.4" 2.5" 1.5 L 0.04 lb
48" T-Tracks are designed for use with Yakima and Thule rack systems. T-Tracks are currently only offered for Full-Size DECKED Systems., If you are looking to permanently mount tracks that provide a strong, low profile attachment point for Yakima or Thule rack systems, we have you covered. Core Tracks are made from 6063 T5 aluminum alloy. They can be oriented towards the cabside or tailgate side of your truck bed. These T-tracks have been custom manufactured to align with the steel tubes in your DECKED deck part. Each set of T-tracks come with two tracks and stainless steel mounting screws.
58" T-Tracks are designed for use with Yakima and Thule rack systems. T-Tracks are currently only offered for Full-Size DECKED Systems., If you are looking to permanently mount tracks that provide a strong, low profile attachment point for Yakima or Thule rack systems, we have you covered. Core Tracks are made from 6063 T5 aluminum alloy. They can be oriented towards the cabside or tailgate side of your truck bed. These T-tracks have been custom manufactured to align with the steel tubes in your DECKED deck part. Each set of T-tracks come with two tracks and stainless steel mounting screws.
Quick Links
Get Social
© 2024 Accessory Warehouse | All Rights Reserved
