-
Go bold or go home with ARIES Big Step 4" round side bars. There is nothing that finishes off an aggressive custom build or wild offroad ride quite like these oversize nerf bars. They feature an extra-large 4" diameter to show well on larger, lifted vehicles, and they have raised, non-skid step pads for safe, comfortable footing. They're also constructed to be lightweight, rust-free and vehicle-specific for a no-drill install. Big Steps are all about showing off. These bold, black nerf bars feature 4" diameter, heavy-wall tubes with contoured mandrel bends, hugging the sides of your beefed up ride and accenting its unapologetic style. The nerf bars are particularly designed to show well on larger trucks, Jeeps and SUVs, especially those equipped with a lift kit and offroad tires. As bold as their attribute is, Big Step 4" side bars are made for safety. They feature extra-large step pads constructed from tough polypropylene. Poly construction makes them completely rust-proof and provides long-lasting UV resistance. The step pads are also raised off the tubes and provide a wide, non-skid surface for a comfortable step with plenty of traction. Because Big Steps are styled as offroad nerf bars, we construct them from aluminum. We use a hardened T6 aluminum alloy to be lightweight and highly corrosion-resistant, while offering ample strength for a rigid step. The aluminum is covered in a unique textured black powder coat finish that not only maximizes corrosion resistance but also helps hide minor scuffs, scratches and grime. This allows your offroad truck, Jeep or SUV to maintain a clean appearance. All Big Step aluminum nerf bars are made for vehicle-specific application. The bends of the tubes, the placement of the step pads and the positioning of the mounting brackets are all customized to fit each unique vehicle application. This particular set of custom nerf bars is engineered to fit certain years of the Toyota Tundra (see application information to ensure compatibility with your vehicle's year, make, model and style). This set of Toyota Tundra nerf bars comes with all necessary hardware and brackets for a complete installation. The brackets are uniquely shaped to integrate with the vehicle, mounting without any drilling required. The brackets are constructed from high-strength steel and are protected with a durable black powder coat finish for longevity. To complete the look of your big, bold offroad-style build, Big Step side bars are designed to complement the ARIES Big Horn bull bar. This bull bar features the same 4" diameter tubing and aggressive attitude as their nerf bar counter parts, and it is intended to show well on larger, lifted trucks. It is available in the same textured black powder-coated aluminum as Big Step side bars, as well as a polished stainless steel finish option., BIG STEP 4" BLACK ALUMINUM ROUND SIDE BARS, SELECT TOYOTA TUNDRA #AL232013 - Bold, 4" diameter shows well on large, lifted vehicles with offroad tires. Non-corrosive, hardened T6 aluminum alloy is strong but lightweight. Unique textured black powder coat helps hide scuffs and grime for a clean finish. Raised, non-skid step pads provide a comfortable step with ample traction. Brushed stainless steel ARIES insignia on each step for a distinguished look. Custom mandrel bends contour to the body of the vehicle. Made to complement ARIES Big Horn bull bars. No-drill, vehicle-specific application for a custom fit. Heavy-duty steel mounting brackets for a solid step. Limited lifetime warranty (five-year finish, one-year parts). Notes: Includes one pair of side bars and mounting hardware.
Go bold or go home with ARIES Big Step 4" round side bars. There is nothing that finishes off an aggressive custom build or wild offroad ride quite like these oversize nerf bars. They feature an extra-large 4" diameter to show well on larger, lifted vehicles, and they have raised, non-skid step pads for safe, comfortable footing. They're also constructed to be lightweight, rust-free and vehicle-specific for a no-drill install. Big Steps are all about showing off. These bold, black nerf bars feature 4" diameter, heavy-wall tubes with contoured mandrel bends, hugging the sides of your beefed up ride and accenting its unapologetic style. The nerf bars are particularly designed to show well on larger trucks, Jeeps and SUVs, especially those equipped with a lift kit and offroad tires. This set of Nissan Titan nerf bars comes with all necessary hardware and brackets for a complete installation. The brackets are uniquely shaped to integrate with the vehicle, mounting without any drilling required. The brackets are constructed from high-strength steel and are protected with a durable black powder coat finish for longevity. To complete the look of your big, bold offroad-style build, Big Step side bars are designed to complement the ARIES Big Horn bull bar. This bull bar features the same 4" diameter tubing and aggressive attitude as their nerf bar counter parts, and it is intended to show well on larger, lifted trucks. It is available in the same textured black powder-coated aluminum as Big Step side bars, as well as a polished stainless steel finish option., BIG STEP 4" BLACK ALUMINUM ROUND SIDE BARS, SELECT NISSAN TITAN, XD #AL239042 Includes one pair of side bars and mounting hardware. Limited lifetime warranty (five-year finish, one-year parts). Heavy-duty steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. Made to complement ARIES Big Horn bull bars. Custom mandrel bends contour to the body of the vehicle. Brushed stainless steel ARIES insignia on each step for a distinguished look. Raised, non-skid step pads provide a comfortable step with ample traction. Unique textured black powder coat helps hide scuffs and grime for a clean finish. Non-corrosive, hardened T6 aluminum alloy is strong but lightweight. Bold, 4" diameter shows well on large, lifted vehicles with offroad tires.
Go bold or go home with ARIES Big Step 4" round side bars. There is nothing that finishes off an aggressive custom build or wild offroad ride quite like these oversize nerf bars. They feature an extra-large 4" diameter to show well on larger, lifted vehicles, and they have raised, non-skid step pads for safe, comfortable footing. They're also constructed to be lightweight, rust-free and vehicle-specific for a no-drill install. Big Steps are all about showing off. These bold, black nerf bars feature 4" diameter, heavy-wall tubes with contoured mandrel bends, hugging the sides of your beefed up ride and accenting its unapologetic style. The nerf bars are particularly designed to show well on larger trucks, Jeeps and SUVs, especially those equipped with a lift kit and offroad tires. As bold as their attribute is, Big Step 4" side bars are made for safety. They feature extra-large step pads constructed from tough polypropylene. Poly construction makes them completely rust-proof and provides long-lasting UV resistance. The step pads are also raised off the tubes and provide a wide, non-skid surface for a comfortable step with plenty of traction., BIG STEP 4" BLACK ALUMINUM ROUND SIDE BARS, SELECT TOYOTA TACOMA #AL232009 Limited lifetime warranty (five-year finish, one-year parts) Heavy-duty steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. Made to complement ARIES Big Horn bull bars. Custom mandrel bends contour to the body of the vehicle. Brushed stainless steel ARIES insignia on each step for a distinguished look. Raised, non-skid step pads provide a comfortable step with ample traction. Unique textured black powder coat helps hide scuffs and grime for a clean finish. Non-corrosive, hardened T6 aluminum alloy is strong but lightweight. Bold, 4" diameter shows well on large, lifted vehicles with offroad tires.
These mounting brackets are designed for vehicle-specific application and provide solid attachment for ARIES 6" oval side bars. They feature high-strength steel construction and a durable black powder coat finish. With a vehicle-specific design and the track mounting system of ARIES 6" ovals, you get a custom fit for your unique truck or SUV and an easy-as-possible, no-drill installation. To verify which side bars and brackets will fit your specific vehicle, see the application information. All brackets will accommodate both finish options., MOUNTING BRACKETS FOR 6" OVAL SIDE BARS #4542 Includes mounting brackets and hardware only (side bars sold separately). Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty steel construction with a durable black powder coat finish. Compatible with 6" oval track mounting system for easy, secure installation. No-drill, vehicle-specific application for a custom fit.
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead. RidgeStep truck running boards add a bold accent to your work truck or offroader, featuring an angular design. The boards themselves are made with definitive edges, and the welded, angular end caps give them an aggressive, no-nonsense look. RidgeStep running boards also feature integrated backsplashes along the inside edge, helping to protect the sides of your truck against gravel spray and other debris. All ARIES RidgeStep running boards are made for vehicle-specific application, using our VersaTrac system. The VersaTrac brackets install with no drilling required and are compatible with other VersaTrac running board options. This set of RidgeStep running boards is designed to fit specific years of the Chevrolet Silverado and GMC Sierra 1500, 2500 HD or 3500 HD crew cab (see application info to verify fitment). For rust resistance that can go the distance, these Chevrolet / GMC running boards are crafted with a two-part finish. First, an E-coat is applied for an initial layer of rust resistance. Then, the E-coat is covered with a unique and highly durable textured black powder coat that further enhances corrosion resistance, as well as resilience to chipping and UV damage. This textured finish helps hide minor scuffs, scratches and grime and keeps your truck looking fresh and professional for the next challenge ahead., RIDGESTEP 6-1/2" X 91" BLACK STEEL RUNNING BOARDS, SELECT SILVERADO, SIERRA CREW #2055541 High-strength, all-steel construction with no plastic parts. Angular design for a tough, no-nonsense look on hardworking trucks. Stamped steel treads for a non-skid step that will never wear or crack. Flat profile and 6-1/2" width provide a comfortable step. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Welded steel end caps for a durable accent. VersaTrac mounting system for easy installation and vehicle customization. No-drill, vehicle-specific application for a custom fit. Heavy-duty, powder-coated steel mounting brackets for a solid step. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes RidgeStep running boards #C2891 and VersaTrac brackets #2055105.
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 91" STEEL RUNNING BOARDS, SELECT DODGE, RAM 1500, 2500, 3500 #2055536 Includes RidgeStep running boards #C2891 and VersaTrac brackets #2055111. Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts.
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., RIDGESTEP 6-1/2" X 91" RUNNING BOARDS, SELECT SILVERADO, SUBURBAN, SIERRA, YUKON #2055512 Includes RidgeStep running boards #C2891 and VersaTrac brackets #2055101 Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. Crew Cab (Gas)
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead., ROCKER STEP RUNNING BOARDS, SELECT TOYOTA TACOMA #2074151 Includes side steps and mounting hardware. Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. VersaTrac mounting system for easy installation and vehicle customization. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts.
RidgeStep running boards are some of the best running boards for work trucks and offroad trucks because they feature a tough, uncompromising construction and an aggressive style to complement the professional ride. RidgeStep truck running boards are made with an all-steel construction, raised steel treads, angular profile, angular end caps, durable finish and a no-nonsense, no-drill installation. RidgeStep running boards are built entirely from steel to ensure maximum strength for tough jobs and wild trails. They have no plastic parts, meaning they won't crack or fade over time. With each step up into your truck, you'll have a solid foothold and a rigid stepping surface for confident entry or exit. The all-steel construction of these truck running boards is particularly advantageous for enhancing traction. RidgeSteps are covered with protruding, circular, all-steel treads that lock onto your boots with each climb, regardless of wet or muddy conditions. Because the treads are made from steel, they won't wear down like plastic alternatives. The 6-1/2" wide profile always provides reliable traction and a comfortable first step for the trail or job ahead. RidgeStep truck running boards add a bold accent to your work truck or offroader, featuring an angular design. The boards themselves are made with definitive edges, and the welded, angular end caps give them an aggressive, no-nonsense look. RidgeStep running boards also feature integrated backsplashes along the inside edge, helping to protect the sides of your truck against gravel spray and other debris. All ARIES RidgeStep running boards are made for vehicle-specific application, using our VersaTrac system. The VersaTrac brackets install with no drilling required and are compatible with other VersaTrac running board options. This set of RidgeStep running boards is designed to fit specific years of the Chevrolet Colorado and GMC Canyon (see application info to verify fitment). For rust resistance that can go the distance, these Chevrolet / GMC running boards are crafted with a two-part finish. First, an E-coat is applied for an initial layer of rust resistance. Then, the E-coat is covered with a unique and highly durable textured black powder coat that further enhances corrosion resistance, as well as resilience to chipping and UV damage. This textured finish helps hide minor scuffs, scratches and grime and keeps your truck looking fresh and professional for the next challenge ahead., RIDGESTEP 6-1/2" X 85" BLACK STEEL RUNNING BOARDS, SELECT COLORADO, CANYON - High-strength, all-steel construction with no plastic parts. Angular design for a tough, no-nonsense look on hardworking trucks. Stamped steel treads for a non-skid step that will never wear or crack. Flat profile and 6-1/2" width provide a comfortable step. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Welded steel end caps for a durable accent. VersaTrac mounting system for easy installation and vehicle customization. No-drill, vehicle-specific application for a custom fit. Heavy-duty, powder-coated steel mounting brackets for a solid step. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes RidgeStep running boards #C2885 and VersaTrac brackets #2055104.
Powerful, definitive and uncompromising as a mountain ridge, ARIES RidgeStep running boards are made from solid steel with zero plastic parts. Their angular design and stamped, non-skid treads are geared for hardworking trucks, providing reliable footing to get the job done. These commercial-duty running boards feature a tough, textured black powder coat finish that not only protects against rust but also has the unique ability to hide minor scratches and grime. The boards install using the ARIES VersaTrac mounting system for easy, no-drill installation and added customization options., RIDGESTEP 6-1/2" X 85" BLACK STEEL RUNNING BOARDS (NO BRACKETS) #C2885 Includes one pair of running boards (VersaTrac mounting brackets sold separately). Includes one pair of running boards (VersaTrac mounting brackets sold separately). Limited lifetime warranty (three-year finish, one-year parts). Heavy-duty, powder-coated steel mounting brackets for a solid step. No-drill, vehicle-specific application for a custom fit. Welded steel end caps for a durable accent. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. Textured black powder coat easily hides minor scratches and grime. Flat profile and 6-1/2" width provide a comfortable step. Stamped steel treads for a non-skid step that will never wear or crack. Angular design for a tough, no-nonsense look on hardworking trucks. High-strength, all-steel construction with no plastic parts. 
When you're out on the trail in your lifted truck or lifted Jeep, you need a precise combination of running-board-meets-rocker-guard. While many nerf bars and running boards provide a solid step up, oftentimes they don't have the vertical clearance needed to clear rocks, logs and other obstacles. Likewise, many rocker guards can help protect your rocker panels from damage, but they lack the safety and convenience of aftermarket side steps. With ARIES Rocker Step running boards, you get the best of both worlds. Rocker Step running boards offer, first and foremost, a solid step up into your offroader. They are designed with a double-tube configuration with a 3" wide, welded top plate, giving you reliable footing out on the trail. The steps have an aggressive cutout pattern that not only adds style, but also allows dirt and debris to pass through, keeping the steps and the interior of your vehicle clean. For dependable, non-skid traction rain or shine, Rocker Step running boards are covered with a highly textured finish. This provides a solid grip for your boots and enhanced safety wherever the trail may lead. More than just side steps, Rocker Step running boards are also built to offer extra side protection for the vehicle. They feature an all-steel construction and are fully welded together for maximum strength. With the Rocker Steps bolted onto the sides of the vehicle, they add extra protection for the rocker panels against scuffs, scratches and dents., ROCKER STEP RUNNING BOARDS, SELECT SILVERADO, SIERRA 1500, 2500, 3500 CREW CAB #2074109 Double-tube layout and 3" wide top plate provide a solid step. Heavy-duty design offers extra protection for the sides of the vehicle. Flat profile increases ground clearance to be off-road ready. Textured black powder coat easily hides minor scratches and grime. Dual-layer E-coat and powder coat finish for maximum corrosion resistance. High-strength, all-steel construction with no plastic parts. Pre-welded mounting brackets for increased rigidity and simpler installation. No-drill, vehicle-specific application for a custom fit. Limited lifetime warranty (three-year finish, one-year parts). Notes: Includes side steps and mounting hardware
Quick Links
Get Social
© 2024 Accessory Warehouse | All Rights Reserved
