-
ARIES offroad Jeep tube door mirrors are the ideal solution for "Jeep mirrors doors off", helping to transform your Jeep Wrangler or Jeep Gladiator truck into the ultimate offroad ride. They are designed to quickly and securely mount onto ARIES Jeep tube doors and provide a rock-solid view. The high-strength steel construction is specially engineered to prevent rattling and vibration to give you a clear, steady side mirror view. This pair of steel Jeep half door mirrors are uniquely constructed for offroading. Vibrations are one of the biggest problems for Jeep door mirrors, and this pair combats every bump and vibration with a rock-solid steel construction. The brackets are 11-gauge steel, and the mounting plate is 16-gauge. A center-mount ball stud provides a rigid attachment point with the option to tilt and adjust the mirrors as needed. Each of these Jeep side mirrors features 5-inch diameter convex glass, providing a wide view and increased safety on the trail, minimizing blind spots. The mirror backing and hardware are covered in a durable black powder coat finish to integrate well with your offroad look. For easy installation and removal as needed, these Jeep off road mirrors attach to any ARIES front tube doors with no drilling needed. They are designed for offroad use only. Two mirrors are included in this package., OFFROAD JEEP WRANGLER TUBE DOOR MIRRORS (2-PACK) #3500300 Rugged build provides a stable view on offroad Jeeps. High-strength carbon steel construction with durable black powder coat. Rock-solid 11-gauge steel brackets with 16-gauge steel mounting plate. Easy, no-drill installation and quick, as-needed removal. Fits all ARIES front tube door bolt configurations. Compatible with most other aftermarket tube doors (drilling may be required). 5" diameter convex glass helps eliminate blind spots for safe maneuvering. 5/16" center-mount ball stud for added stability and easy tilt adjustment. Limited lifetime warranty (one-year finish, one-year parts). Notes: For offroad use only. Will not fit factory doors. Includes two mirrors and installation hardware.
-
The Trektop Ultra takes our most advanced soft top for the Jeep Wrangler JL (Supertop Ultra) and adds the coveted fastback styling! The Trektop Ultra can fully retract with our patent-pending guide track system. The enhanced Sunrider sunroof bathes all passengers in open air. Patented lift assist makes it simple for one person to shift the top from fully retracted to Sunrider position., Features the fastback (slant back) appearance. Flow-Back technology using Bestops patented Guide-Track system simplifies your access to open air and lets the entire top slide neatly into the cargo area. Enhanced Sunrider sunroof bathes all passengers in open air. Patented lift assist makes it simple for one person to shift the top from fully retracted to Sunrider feature. Run it in four ways: fully-enclosed, Sunrider open, Safari-style bikini or fully open. Constructed in our premium Twill fabric.
-
CURT class 3 trailer hitches are designed, built and tested to accommodate a wide variety of towing applications. They are used on everything from full-size cars, vans and crossovers to light-duty pickup trucks and SUVs. Class 3 trailer hitches are perfect for towing fishing boat trailers, popup campers, ATV trailers, utility trailers and much more. They are also ideal for adding storage space to your vehicle with a hitch-mounted cargo carrier or bike rack (NOTE: Never exceed the lowest-rated towing component). Each CURT class 3 hitch is engineered to fit on a specific vehicle. This provides the best possible fit and easiest installation. This particular custom class 3 hitch fits specific years of the Jeep Wrangler JL (to verify vehicle compatibility, see the CURT application guide or use the Vehicle Lookup tool). It is designed to integrate with the vehicle's existing features and offer a reliable connection to your trailer. This Jeep Wrangler hitch is stringently tested in accordance with SAE J684 to ensure a weight carrying capacity of 3,500 lbs. gross trailer weight and 350 lbs. tongue weight. It is compatible with a weight distribution hitch to provide more stable towing and a weight distribution rating of 4,000 lbs. WD and 400 lbs. WDTW. It also features a 2" receiver tube opening to accept ball mount or other hitch accessory with a 2" x 2" shank., CLASS 3 TRAILER HITCH, 2" RECEIVER, SELECT JEEP WRANGLER JL #13392 Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight. Compatible with weight distribution hitch (4,000 lbs. WD / 400 lbs. WDTW). Engineered with a vehicle-specific design for a custom fit. Concealed main body for OE look and seamless integration with the vehicle. Tested for safety in accordance with SAE J684. Precisely welded for superior strength and fit. Protected by a durable high-gloss black powder coat finish. Co-cured in a rust-resistant liquid A-coat, inside and out. Equipped with an open-back receiver for easy cleaning. Limited lifetime warranty (one-year finish, one-year parts). Made in USA (may include imported hardware). Notes: Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities. Installation requires temporary lowering of exhaust. Includes installation hardware. NOTE: Excluding Diesel
-
Driving the family up to the campground? Hauling tools and equipment from the home improvement store? Pulling your boat to the nearby swimming hole? Whatever your destination and whatever trailer you're towing, Bring It® with a CURT trailer hitch! CURT class 3 trailer hitches are designed, built and tested to accommodate a wide variety of towing applications. They are used on everything from full-size cars, vans and crossovers to light-duty pickup trucks and SUVs. Class 3 trailer hitches are perfect for towing fishing boat trailers, popup campers, ATV trailers, utility trailers and much more. They are also ideal for adding storage space to your vehicle with a hitch-mounted cargo carrier or bike rack (NOTE: Never exceed the lowest-rated towing component). Each CURT class 3 hitch is engineered to fit on a specific vehicle. This provides the best possible fit and easiest installation. This particular custom class 3 hitch fits specific years of the Jeep Wrangler JL EcoDiesel (to verify vehicle compatibility, see the CURT application guide or use the Vehicle Lookup tool). It is designed to integrate with the vehicle's existing features and offer a reliable connection to your trailer. This Jeep Wrangler EcoDiesel hitch is stringently tested in accordance with SAE J684 to ensure a weight carrying capacity of 3,500 lbs. gross trailer weight and 350 lbs. tongue weight. It is compatible with a weight distribution hitch to provide more stable towing and a weight distribution rating of 4,000 lbs. WD and 400 lbs. WDTW. It also features a 2" receiver tube opening to accept ball mount or other hitch accessory with a 2" x 2" shank. From class 1 to class 5, all CURT custom-fit receiver hitches are made in the USA to ensure quality from design to finish (may include imported hardware). They are designed with hands-on engineering for a precise fit. They are welded using a combination of manual and robotic operations for speed and accuracy. Finally, they are finished with our unique co-curing process. Each hitch is dipped in a liquid A-coat for rust prevention, inside and out, and then co-cured in a durable black powder coat finish for maximum rust, chip and UV resistance. Every CURT custom hitch design is thoroughly tested at our in-house testing facility in Detroit, MI. We adhere to the proposed SAE J684 testing protocols to make sure that the hitch you mount on your vehicle will be a dependable means to enjoy your lifestyle. Whatever your passion -- whether it's hunting, fishing, camping, offroading or hard work -- you can expect reliability for the road ahead. All CURT custom hitches are covered by a limited lifetime warranty to give you confidence in each adventure, season after season., CLASS 3 TRAILER HITCH, 2" RECEIVER, SELECT JEEP WRANGLER JL ECODIESEL #13564 Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight. Compatible with weight distribution hitch (4,000 lbs. WD / 400 lbs. WDTW). Engineered with a vehicle-specific design for a custom fit. Tested for safety in accordance with SAE J684. Precisely welded for superior strength and fit. Protected by a durable high-gloss black powder coat finish. Co-cured in a rust-resistant liquid A-coat, inside and out. Equipped with an open-back receiver for easy cleaning. Limited lifetime warranty (one-year finish, one-year parts). Made in USA (may include imported hardware). Notes: Trailer hitch weight ratings are limited to vehicle manufacturer's stated capacities. Includes installation hardware.
-
If you're towing your vehicle along for your next RV adventure, Bring It® with CURT! CURT towed-vehicle RV harnesses are the ideal solution to connecting your vehicle's electrical system to your RV while dinghy towing. Each RV harness is made for vehicle-specific application, using OEM-compatible plugs to "T" into the vehicle's wiring without any need for cutting or splicing. This particular RV dinghy tow wiring harness is designed for select years of the Jeep Wrangler JL and Gladiator (see application info to verify fitment). With a towed-vehicle RV harness installed, hitching up your vehicle behind your RV is fast and easy. Simply plug the provided 4-way flat connector from the front of the vehicle into the RV's 4-way flat socket. The RV harness uses the vehicle's existing tail lights, turn signals and brake lights, eliminating the need to purchase additional lighting. The vehicle's lights are able to operate in conjunction with your RV's lights, signaling other drivers and functioning just like a standard trailer in tow. The simple plug-and-play design of CURT towed-vehicle RV harnesses makes installation a breeze, but these custom harnesses are also built for lasting durability. Each harness features integrated block diodes. These diodes isolate the vehicle's electronics from the RV signals in a way that protects them from overheating and short circuiting. Each CURT towed-vehicle RV harness comes with a 4-way flat extension to reach the RV connector socket, a mounting bracket to help keep the wires ordered and protected on your vehicle and all the necessary hardware for a complete installation., Connects a towed vehicle to an RV using a standard 4-way flat trailer plug. Simple plug-and-play design eliminates the need for cutting or splicing. Integrated block diodes isolate sensitive vehicle electronics from RV signals. Uses towed vehicle's existing taillights, brake lights and turn signals. Notes: Includes harness, 4-flat extension, mounting bracket and hardware.
-
FIA Leatherlite custom fit seat covers are engineered to meet or exceed vehicle manufacturer standards. An advanced design creates a dynamic state-of-the-art custom interior. On vehicle testing of all Fia custom fit seat covers ensures an exact fit each time. Super- Grip is the slip resistent fastening system that incorporates quick release belt and buckle fasteners, zippers and velcro, making installation quick and easy. Additional foam padding in the cushion and back rest, provide added comfort. The form fit wrap around design that is accomplished through multi-directional stretch trim material molds the cover to the contours of your seat. The soft touch simulated leather material is hand washable as well as lightfast and colorfast. Custom formed seat belt and head rest openings, along with center console covers add to the OE custom look. Head rest covers included. Available with black trim and side panel and BLK/BLK, gray, mustard or red center panel., Bench seat with adjustable, non-removable headrests. 2 Door.
-
FIA Leatherlite custom fit seat covers are engineered to meet or exceed vehicle manufacturer standards. An advanced design creates a dynamic state-of-the-art custom interior. On vehicle testing of all Fia custom fit seat covers ensures an exact fit each time. Super- Grip is the slip resistent fastening system that incorporates quick release belt and buckle fasteners, zippers and velcro, making installation quick and easy. Additional foam padding in the cushion and back rest, provide added comfort. The form fit wrap around design that is accomplished through multi-directional stretch trim material molds the cover to the contours of your seat. The soft touch simulated leather material is hand washable as well as lightfast and colorfast. Custom formed seat belt and head rest openings, along with center console covers add to the OE custom look. Head rest covers included. Available with black trim and side panel and BLK/BLK, gray, mustard or red center panel., Bench seat with adjustable, non-removable headrests. 2 Door.
-
FIA Leatherlite custom fit seat covers are engineered to meet or exceed vehicle manufacturer standards. An advanced design creates a dynamic state-of-the-art custom interior. On vehicle testing of all Fia custom fit seat covers ensures an exact fit each time. Super- Grip is the slip resistent fastening system that incorporates quick release belt and buckle fasteners, zippers and velcro, making installation quick and easy. Additional foam padding in the cushion and back rest, provide added comfort. The form fit wrap around design that is accomplished through multi-directional stretch trim material molds the cover to the contours of your seat. The soft touch simulated leather material is hand washable as well as lightfast and colorfast. Custom formed seat belt and head rest openings, along with center console covers add to the OE custom look. Head rest covers included. Available with black trim and side panel and BLK/BLK, gray, mustard or red center panel., Bench seat with adjustable, non-removable headrests. 2 Door.
-
FIA Leatherlite custom fit seat covers are engineered to meet or exceed vehicle manufacturer standards. An advanced design creates a dynamic state-of-the-art custom interior. On vehicle testing of all Fia custom fit seat covers ensures an exact fit each time. Super- Grip is the slip resistent fastening system that incorporates quick release belt and buckle fasteners, zippers and velcro, making installation quick and easy. Additional foam padding in the cushion and back rest, provide added comfort. The form fit wrap around design that is accomplished through multi-directional stretch trim material molds the cover to the contours of your seat. The soft touch simulated leather material is hand washable as well as lightfast and colorfast. Custom formed seat belt and head rest openings, along with center console covers add to the OE custom look. Head rest covers included. Available with black trim and side panel and BLK/BLK, gray, mustard or red center panel., Bench seat with adjustable, non-removable headrests. 2 Door.
-
OE30 Series custom fit seat covers are engineered to meet or exceed vehicle manufacturer standards. An advanced design creates a dynamic state-of-the-art custom interior. On vehicle testing of all Fia custom fit seat covers ensures an exact fit each time. Super- Grip is the slip resistent fastening system that incorporates quick release belt and buckle fasteners, zippers and velcro, making installation quick and easy. Additional foam padding in the cushion and back rest, provide added comfort. The form fit wrap around design that is accomplished through multi-directional stretch trim material molds the cover to the contours of your seat. The original equipment tweed material is hand washable as well as lightfast and colorfast. Custom formed seat belt and head rest openings, along with center console covers add to the OE custom look. Head rest covers included. Available in Charcoal, Gray and Taupe., Bench seat with adjustable, non-removable headrests. 2 Door.